About Product Description Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 1.2 / 1.5 % ISO 294-4 Density 1.05 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method 105 ISO 2039/2 bending…
About Benefits & Features ELTEX® P KF359 is a random terpolymer with a high content of co-monomer especially designed for the blown film process, it contains no technical additive. It is thus particularly appreciated by users wishing to use their…
About Product Description Generic PE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.902 g/cm³ JIS K7112 Melt Flow Rate 2.2 g/10min JIS K6922-2 MECHANICAL Nominal value Unit Test method Shore hardness Shaw’s D 44…
About Optical Grade CHARACTERISTICS: High transparency, High heat, Extrusion&& Product Description Generic PS (GPPS) Material Status Commercial: Active Features Good Clarity,High Heat Resistance Availabilitys North America,Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Melt Flow…
About NYCOA GR30 V0 is a 30% glass fiber reinforced, flame retardant Nylon 6 resin used for injection molding. This resin complies with ROHS requirements, as it contains a non-halogenated flame retardant package. NYCOA GR30 V0 is listed by Underwriters…
About Algoflon® DF 210 F is a white fine coagulated powder and is produced without any intentional use or addition of PFOA. It is recommended as additive in plastics for improving their anti-dripping behavior. Algoflon® DF 210 F shows very…
About SABIC® PP 531P has a high molecular weight and therefore mainly used for extrusion. It can be used for non-pressure pipes and sheet applications. The product mentioned herein is in particular not tested and therefore not validated for use…
About UNITAL® Acetal (polyoxy-methylene) offers design engineers a superior blend of strength, stiffness, lubricity, and dimensional stability. These properties, along with inherent machining ease, have made UNITAL one of the most widely used engineering grade thermoplastics. To meet specific application…
About ROTOUN® LLD610UP is a Linear Low Density Polyethylene product. It can be processed by rotational molding and is available in Asia Pacific. Applications of ROTOUN® LLD610UP include food contact applications and tanks. Characteristics include: Flame Rated RoHS Compliant Good…
About APEX® S-96-A0914N-90 is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific.&& Product Description Supplier Teknor Apex Generic PVC, not specified Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density…