About Celcon® acetal copolymer grade M15HP is a creep resistant, high viscosity polymer providing optimum performance in general purpose injection molding. This grade provides overall excellent performance in applications requiring high stiffness. Chemical abbreviation according to ISO 1043-1: POM&& Product…
About TECAFORM® is a semi-crystalline thermoplastic offering high strength, stiffness and toughness. TECAFORM® is resistant to hot water, hydrocarbons and solvents, and it possesses good bearing and wear properties. It is available in natural and black grades. TECAFORM® is commonly…
About LUVOCOM® 1105/GF/20/EM/BK is a Polyetheretherketone (PEEK) material filled with 20% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1105/GF/20/EM/BK are: Flame Rated…
About Description LUTENE-H BE0350 is a HDPE material with high parison stability and good processing properties. BE0350 can be used to produced containers for wide range of applications. Applications LUTENE-H BE0350 is used to produce for the following parts. lightweight…
About POLYfill PP CIM9040 is a Polypropylene product filled with 40% mineral. It is available in Asia Pacific, Europe, Latin America, or North America.&& Product Description Supplier Polykemi Generic PP not specified Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical…
About Novalloy-S S1220 Novalloy-S S1220 is a Polycarbonate + ABS (PC+ABS) product filled with 20% glass fiber. It can be processed by injection molding and is available in Europe.&&Novalloy-S S1220 Novalloy-S S1220 is a Polycarbonate + ABS (PC+ABS)…
About NHU-PPS 11100C NHU-PPS Polymer is featuring narrow molecular weight distribution, low content of oligomer and stable properties. By adopting advanced automated polymerization and post-processing technology, NHU are nmnufacturing PPS of different grades with MFR ranging from 50-3000. In…
About TAROBLEND 46 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Europe. Characteristics include: Flame Rated High Flow&& Product Description Generic PC+ABS Material Status Commercial: Active Features High liquidity,HB Availabilitys…
About InnoPlus LL9641U/LL9641UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent stiffness and a good balance between impact strength and environmental stress cracking…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Features Heat Resistance, Good Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ISO 1183 Shrinkage rate 0.3-0.9 % ISO 294/4 MECHANICAL Nominal value Unit Test…