About EdgeGlas® TP is a Thermoplastic product. It can be processed by injection blow molding or injection molding and is available in North America. Typical application: Food Contact Applications.&& Product Description Generic 热塑性聚酯 Material Status Commercial: Active Features Terpolymer Availabilitys…
About Mylar® S (35 guage) is a Polyethylene Terephthalate (PET) product. It is available in North America. Applications of Mylar® S (35 guage) include coating applications, decorative parts, film, reflectors and ribbons. Characteristics include: Chemical Resistant Heat Resistant&& Product Description…
About CYCOLOY HCX1640 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an improved chemical resistance, impact modified, biocompatible grade that can be injection molded. This Healthcare Management of Change grade CYCOLOY HCX1640 resin is an excellent candidate for a wide variety of…
About TECHNOMELT® PA 7808 BLACK™ is a moldable polyamide with excellent adhesion to tough substrates. This product’s superior flexibility offers incredible strain relief on cables and wires. It is ideal for encapsulation of heat-producing components in appliance and consumer electronics…
About Kraton D1117 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied from North America in the physical form identified below. Kraton D1117 PT – supplied as a…
About Optema TC 220 is an ethylene methyl acrylate copolymer, which can be used in specialty bonding applications and as a toughener for engineering polymers. It can be processed at temperatures as low as 200°F (93°C) and as high as…
About Material Type: Red color fluoroelastomer compound, hardness Shore A 75-85. Based on bisphenol curable terpolymer which is higher fluorine content than copolymer. Features: Excllent mold flow, mold release, Good resistance to the fuel containing alcohols. Process Methods: Suitable for…
About 2103-85AE is a thermoplastic polyurethane elastomer. Feature: Film and profile resin&& Product Description Supplier Lubrizol Advanced Materials Generic TPU-醚 Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About Product Description Supplier SAMSUNG Generic ABS Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density lvory 1.06 g/cm³ ASTM D792 Melt Flow Rate 200℃，5.0kg…
About Molding Parameters: 4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing. The dry temperature at 16 hours is 180°F. For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.&&…