About OREVAC® CA100 is a chemically functionalized polypropylene with a high content of maleic anhydride. Grafted maleic anhydride induces polarity to polypropylene and so outstanding adhesion properties on glass and natural fibers, and mineral fillers. Applications OREVAC® CA100 has been…
About Characteristics: High toughness Laser: Ar/solid-state Post-cure: Not needed&& Product Description Generic 环氧树脂 Material Status Commercial: Active Features Good flexibility Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³…
About SCANBLEND FS8 UV4 is a Polycarbonate + ASA (PC+ASA) product. It is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated UV Stabilized&& Product Description Supplier Polykemi Generic ASA+PC Material Status Commercial: Active Features…
About Product Description Generic EMA Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method MA content 20 wt% 日本聚乙烯法 Density 0.942 g/cm³ JIS K7112 Melt Flow Rate 6.0 g/10min JIS K6922-2 MECHANICAL Nominal value Unit Test method…
About Staramide AK8ST41is an Impact Modified, Glass Bead Reinforced Polyamide 66 Injection Molding Resin&& Product Description Generic PA66 Material Status Commercial: Active Features High impact resistance Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical…
About Product Description Supplier Quadrant Generic PA6 Material Status Commercial: Active Features Good flexibility,noise reduction,Solvent resistance,Good wear resistance,Insulation,Good Rigidity,HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Water absorption rate ISO 62…
About K38-20-188 is a natural, UV-stabilized medium density polyethylene pipe and tubing resin designed for natural gas distribution. When blended with an approved INEOS yellow masterbatch, the resulting formulation, known as K38-20-160, is recognized by the Plastics Pipe Institute as…
About Sequel 1828 thermoplastic polyolefin is designed for automotive and heavy-truck applications that require energy management combined with excellent ductility and stiffness over a broad temperature range. This material exhibits excellent processability and dimensional stability. Typical Customer Applications: Exterior Applications,…
About Product Description: API II 505-HF is an intermediate grade of impact modified polystyrene. This material has exceptional gloss, moldability and clorability. Application: API II 505-HF is widely used in housewares, shelving, containers, displays and a wide range of injection…
About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder…