About SABIC® PPcompound G1620A is a low flow PP random copolymer with 20% glass fibers for multi-layer pipe applications. This material has been designed to combine a good performance profile with good processing. Product Description Supplier SABIC Generic PP not…
About DIOSHY® AB-865EM is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific.&& Product Description Supplier DIOSHY Generic SEBS Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method…
About Durethan® BKV 20 FN20 000000 (干燥 ) PA 6, 20 % glass fibers, injection molding, halogen free flame retardant&&Durethan® BKV 20 FN20 000000 PA 6, 20 % glass fibers, injection molding, halogen free flame retardant&& Product Description…
About Product Description Generic PE Material Status Commercial: Active Features High density Technical Data PHYSICAL Nominal value Unit Test method Density 0.960 g/cm³ JIS K7112 Melt Flow Rate 1.0 g/10min JIS K6922-2 MECHANICAL Nominal value Unit Test method Shore hardness…
About AFFINITY™ VP 8770G1 Polyolefin Plastomer is a Polyolefin Plastomer (POP) produced using INSITE™ Technology. AFFINITY VP 8770G1 Polyolefin Plastomer has exceptionally high clarity and flexibility. It has been designed for calendering applications but is also suitable for thicker and…
About Product information PA 2241 FR is a flame retardant polyamide 12 for processing in laser sintering systems. It contains a halogen-based flame retardant. Mainly due to its recyclability the material is economical, enabling low-cost part production. Properties flame retardant…
About Examples of applications Governors Plug caps Connectors Coil bobbins Terminal strips Automobiles Railways/Aircraft Ship components&& Product Description Generic DAP增塑剂 Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About MAJORIS DG300 is a polypropylene reinforced with glass fibres intended for injection moulding for outstanding properties for food contact regulations. This quality is also achieving low taste and odour high performances. MAJORIS DG300 has high rigidity and impact strength,…
About Hifax X M2 U16 is a 20% mineral filled, polypropylene grade for injection molding. The grade features very high stiffness and good scratch resistance. The grade has good UV resistance designed for outdoor applications. Typical customer applications are cowl…
About PRE-ELEC® PP 1351 is a dissipative thermoplastic compound based on polypropylene. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resistance between 10e5-10e8 ohms. PRE-ELEC® PP 1351 has an excellent balance of…