About Adstif HA849K Very high stiffness and high clarity polypropylene homopolymer for thermoforming. Features: Very high stiffness Good top load strength High clarity Low odor and taste transfer Very high heat resistance Hot fillable, microwavable Applications: High barrier packaging…
About Telcar TL-2550A is a general purpose, low density thermoplastic elastomer designed for injection molding applications.&& Product Description Supplier Teknor Apex Generic TPE Material Status Commercial: Active Features High liquidity,Oil charge,Low density,Low Hardness,Good coloring Availabilitys Africa & Middle East ,North…
About Auracell® MS is a Cellulose Acetate (CA) product. It can be processed by injection molding and is available in Europe or North America. Primary characteristic: eco-friendly/green.&& Product Description Generic CA Material Status Commercial: Active Features Renewable resources Availabilitys North…
About (DOMAMID 6ST1H) Polyamide 6, impact modified, heat stabilized, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features High impact resistance,Heat Stabilized Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Branched C8 adipate ester&& Product Description Supplier Polyone Generic DEHA增塑剂 Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.919 to 0.925 g/cm³ ASTM D4052 molecular weight 370 water…
About Hiprolon ® 200 VN LM is a polyamide produced from a renewable source. This grade is a polyamide 10.10 neat resin.&& Product Description Supplier Arkema Generic PA 1010 Material Status Commercial: Active Features Renewable resources Availabilitys Africa & Middle…
About Epic S7144 is a two component polyurethane system designed for potting electrical and electronic devices. S7144 is a cost effective potting compound with good hydrolytic stability. S7144 has been designed with a convenient 3:1 by volume mix ratio and…
About GI-1220 is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting polyester parts. GI-1220 is especially good for molds with deep undercuts and for molds that require flexing for part removal. GI-1220 is not sensitive…
About Polene LDPE JJ 4324 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for blown film, film extrusion, or injection molding. Important attributes of Polene LDPE JJ 4324 are: Antiblock Clarity Good Processability…
About Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…