About Nylon 6, 25% Mineral/15% Glass Filled&& Product Description Generic PA6 Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.48 g/cm³ ISO 1183 Shrinkage rate MD：3.2 mm 0.40 to 0.60 % ISO…
About BC 9040T is a clear, addition/platinum cure, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. Application BC9040T is…
About DuPont™ Surlyn® 2601 is an ionomer of ethylene acid copolymer. The resin can be processed in conventional blown film, cast film, sheet extrusion and coextrusion equipment designed to process polyethylene and ethylene copolymer type resins.&& Product Description Supplier DOW…
About Product Description Supplier BASF Generic TPU-醚 Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Tarnoform® 300 GF6 there is 30% glass fibres reinforced injection-moulding grade with very high strength and stiffness and with reduced shrinkage and coefficient of linear thermal expansion.&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,HB…
About HETRON FR992 resin is a low viscosity, unpromoted, flame retardant”) patented epoxy vinyl ester with F-Cat technology. This patented technology results in a resin that exhibits no foaming, excellent exotherm control, and industry-leading storage stability. Laminates made with HETRON…
About An engineered plastic performance for durability and stability ideal for functional testing and rapid tooling applications. This material also provides true plastic look and feel for a vast array of prototyping and end use applications. VisiJet Crystal is USP…
About Product Description Polyester moulding compound, inorganically filled, glass fibre reinforced, styrene free, tracking resistance 600 V, good heat resistance, high viscosity flow characteristics Application Areas H4 and H7 lamp sockets&& Product Description Generic 热固性聚酯 Material Status Commercial: Active Features…
About (DOMAMID A1-001-N1-B) Polyamide 6, nucleated, for injection moulding, black&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Nucleation Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12…
About Durethan® DP1100 901510 (Dry) PA 6, 30 % Mikroglass spheres, injection molding, heat-aging stabilized, low tendency to warp, improved surface finish&&Durethan® DP1100 901510 PA 6, 30 % Mikroglass spheres, injection molding, heat-aging stabilized, low tendency to warp,…