About Moplen HP556E is used in extrusion and blow moulding applications. It is formulated with an enhanced process stabilisation package providing also low water-carry-over during processing on strapping lines. Moplen HP556E is used in the production of straps, sheets, pipes…
About Ethylene-propylene-diene rubber (EPDM), with ethylidene norborene (ENB) as diene; amorphous; low viscosity, fast cure rate.&& Product Description Supplier LANXESS Generic EPDM+SEBS Material Status Commercial: Active Features Low Viscosity,Fast Cure,Amorphous Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test…
About Greenflex FC 45 F is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. Films produced by Greenflex FC 45 F exhibit good optical properties, excellent impact resistance and low creep. The resin shows outstanding bubble stability. Main…
About Plexiglas® VS is a thermoplastic acrylic resin formulated for injection molding applications. It is characterized by its very high melt flow. Plexiglas® VS has excellent weatherability and optical properties allowing it to excel in applications requiring outdoor stability, high…
About Altuglas® VSUVT is a Polymethyl Methacrylate Acrylic product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated.&& Product Description Supplier Trinseo Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method…
About LEXAN ML7689 polycarbonate (PC) siloxane copolymer resin IS a high viscosity injection molding (IM) grade WITH good processability, offering opportunities FOR shorter IM CYCLE times compared TO standard PC resins. This resin offers extreme low temperature (-40 degree C)…
About Heat Resistant Grade&& Product Description Supplier Asahi Kasei Generic PMMA Material Status Commercial: Active Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Melt Flow Rate 230℃，3.80kg 1.2…
About High elasticity with good elastic recovery High melt strength Good impact strength Good flow characteristics ENGAGE™ HM 7280 Polyolefin Elastomer Resin is produced via gas phase polymerization from Dow. This is an ethylene-butene copolymer exhibiting high flexibility and elasticity.…
About NYCOA 2062 is a Nylon copolymer suitable for injection molding and extrusion. This copolymer offers an excellent balance of mechanical properties and outstanding processability. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it…
About Adflex V 109 F is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell’s proprietary Catalloy process technology. It is primarily used for molding, impact modification, extrusion coating and film applications. This resin can be used on conventional injection molding…