About ADIPRENE BL-16 is a liquid urethane elastomer with blocked isocyanate curing sites, which can be activated by heating. The blocked curing sites allow protracted storage of the polymer in the presence of moisture and active vulcanizing agents. Diamine-cured ADIPRENE…
About This block copolymer has a high molecular weight and is provided with a long-term heat stabilisation package. It exhibits high stiffness in combination with outstanding impact strength even at low temperatures. This material is used for extrusion of sewage…
About VESTAKEEP Ultimate is a high-viscosity, unreinforced polyether ether ketone for injection molding and extrusion. The semi-crystalline polymer features superior thermal and chemical resistance. Parts made from VESTAKEEP Ultimate are self-extinguishing. VESTAKEEP Ultimate can be processed by common machines for…
About Versaflex™ CL2003X is an ultra-soft TPE designed for use in injection molding applications where exceptional clarity and ultra-soft properties are desired. New Product. Commercial specifications have not been established. Tactile Feel Ultra-Soft Water Clarity&& Product Description Supplier Polyone Generic…
About Product Description Generic LDPE+EVA Material Status Commercial: Active Features Good heat aging resistance,Good Clarity Technical Data PHYSICAL Nominal value Unit Test method Vinyl acetate content 27.6 % GB/T 30925 Melt Flow Rate 20.0 g/10min GB/T 3682. 1 Density 0.9403…
About Product Description: TREXPRENE ® A88BW is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) and is primarily intended for Exterior applications. This material can be processed using Extrusion, Injection, or Blow Molding equipment.&& Product Description Supplier…
About Ryton® R-4-242NA 40% glass fiber reinforced polyphenylene sulfide compound complies with United States Food and Drug Administration (FDA) and European Union (EU 10/2011 and 1183/2012) regulations for use as a component of articles intended for repeat use in contact…
About CERTENE™ HPB-0760 HPB-0760 is a certified prime Phillips Process designed for BLOW MOLDING of containers for packaging of non-aggressive chemicals. HPB-0760 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength,…
About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Features V-0 Technical Data FLAME CHARACTERISTICS Nominal value Unit Test method Flame retardant level UL 94 0.50 mm V-0 UL 94 3.0 mm V-0 UL 94 Notes 【 Disclaimer…
About Product Description Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 15.6-20.6 g/10min Density 1.194 g/cm³ MECHANICAL Nominal value Unit Test method tensile strength yield 61 MPa fracture 67.8 MPa Tensile…