About LIHAN® B9000N is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Lihan Generic PA6 Material Status Commercial: Active Availabilitys Asia Pacific…
About Branched C8 trimellitate ester&& Product Description Supplier Polyone Generic 偏苯三酸三(3-乙基己基)酯(增塑剂) Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.983 to 0.989 g/cm³ ASTM D4052 acid value 0.02 wt% ASTM…
About Dynalloy™ 8900-series is an innovative thermoplastic elastomer selection formulated to provide the injection molder with a product capable of overmolding and bonding to both low-density polyethylene (LDPE) and polypropylene (PP) with efficient cycle times. Adhesion to Low-Density Polyethylene and…
About Bayfit 566 is a water-blown (MDI)/polyether based foam system used to manufacture high resilience (HR) cold-cure flex molded foam with medium to high load bearing properties. This system is characterized by good flow behavior in a wide variety of…
About TECHNYL® B 238 Black 21N is an unfilled copolyamide 6.6/6, impact modified, for injection moulding. This product offers an excellent notched impact resistance, even at low temperature.&& Product Description Supplier DOMO Generic PA66/6 Material Status Commercial: Active Features HB,Heat…
About Iupiace® AH40 is a Polyphenylene Ether + PS (PPE+PS) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupiace® AH40: Flame Rated.&& Product Description Supplier Mitsubishi Generic PPO(PPE)+PS Material Status Commercial:…
About 8 Melt, Prime Low Density Polyethylene, FDA Compliant&& Product Description Generic LDPE Material Status Commercial: Active Features Low density Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.917 g/cm³ ASTM D792 Melt Flow Rate 190℃，2.16kg…
About V-2 Polycarbonate&& Product Description Supplier EnCom Generic Polycarbonate Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM…
About DAI-EL® G-901 DAI-EL® G-901 is a terpolymer suitable for various peroxide cure systems. DAI-EL® G-901 can be formulated to eliminate the post cure process.DAI-EL® G-901 is suitable for transfer and compression molding applications requiring excellent chemical and steam…
About Polene EVA N 8045 is an Ethylene Vinyl Acetate Copolymer (EVA) material. It is available in Asia Pacific or North America for blow molding, calendering, or injection molding. Primary attribute of Polene EVA N 8045: Low Temperature Resistant. Typical…