About NYLOY® NG-0013N is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in Asia Pacific or North America for injection molding.&& Product Description Supplier Nytex Generic PA6 Material Status Commercial: Active Availabilitys North America,Asia…
About 20% glass-fiber reinforced, easy mold release Non-brominated, non-chlorinated flame retardant Optimum combination of high modulus and impact strength&& Product Description Supplier LOTTE Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity,High impact resistance,Halogen free,Good stripping performance,Flame Characteristics,V-0 Availabilitys North…
About Luranyl® KR 2403 G4 is a Polyphenylene Ether + PS (PPE+PS) material filled with 20% glass fiber. It is available in Europe for injection molding. Important attributes of Luranyl® KR 2403 G4 are: Flame Rated Heat Resistant High Stiffness&&…
About Fainplast PVC CKL 68/K is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Wire & Cable.&& Product Description Generic PVC, not specified Material Status Commercial:…
About 未增强的热塑性合金。高冲击强度，优良的机械性能和热性能。 Product Description Supplier SABIC Generic PC+PBT Material Status Commercial: Active Features Good Rigidity,Good flexibility,High Heat Resistance Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method tensile strength Yield, Type I, 50 mm/min 46 MPa ASTM D638…
About ACLAR® 11A (8 mil) is a Polychlorotrifluoroethylene (PCTFE) product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of ACLAR® 11A (8 mil) include electrical/electronic applications and industrial applications. Characteristics…
About DURAFIDE® 6565A6 is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Good Adhesion&& Product Description Supplier Polyplastics Generic…
About Andur M-95 AS is a custom formulated MDI based polyurethane elastomer system. It is designed as a low cost, easily processed candidate for use in dunnage applications. M-95 AS is a two component, 1:1 ratio (weight) system that can…
About LDPE FILM EXTRUSION GOST16337-77, rev. 1-3 Production method: low density polyethylene is produced by high pressure ethylene polymerization in tubular reactors and reactors with agitator using radical initiators. Application: production of bags, pipes, fittings, articles designed for foodstuff contact,…
About Kraton D1186 E is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: D1186 ET –…