About HiFill® PA6/12 GF33 UV BK001 is a Polyamide 612 (Nylon 612) product filled with 33% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&& Product Description Generic PA612 Material…
About Hexene Linear Low Density Resin Slot Cast Extrusion Outstanding Drawdown Capability Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Consult the regulations for complete details. TUFLIN™ HS-7046 NT 7 Linear Low Density Polyethylene Resin is an ethylene-hexene copolymer,…
About PP Copolymer Black 10% Mixed Mineral filled&& Product Description Generic PP copolymer Material Status Commercial: Active Features Copolymer Availabilitys North America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.970 g/cm³ ISO 1183 Melt…
About Radel® MS NT1 AM Filament offers the best of sulfone polymers, with a superiority in both toughness and impact strength, high temperature capabilities, as well as proven outperformance in chemical resistance relative to both PSU and PEI. It enables…
About Product Description Generic PVC, not specified Material Status Commercial: Active Features Flame Characteristics Availabilitys North America,Europe Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained…
About ebalta GH 706/GL is a well castable two-components epoxy resin, which cures at room temperature and can be casted 40 – 50 mm thickness. The resin GH 706 contains very fine hard fillers and with hardener GL it has…
About The Lifoflex GA, GB and GC series are TPE compounds based on SEBS. They are suited to a wide variety of applications and are characterised by easy processing and high flexibility.&& Product Description Generic SEBS Material Status Commercial: Active…
About PBT medium viscosity 15% glass fibres reinforced, heat stabilized, halogen free flame retardant UL94 V0, good flame proofing also at low thickness, good flow, good mechanical and thermal properties. High CTI value.&& Product Description Generic polybutylene terephthalate Material Status…
About Baydur 645 is a rigid polyurethane structural foam system used in the reaction injection molding (RIM) process. The system is supplied as two reactive liquid components. Component A is a polymeric diphenylmethane diisocyanate (PMDI), and Component B is a…
About Preliminary Datasheet Product Description Generic PETG Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.23 g/cm³ ASTM D792 water content 0.030…