About CGPC PVC H-73 is a Polyvinyl Chloride material. It is available in Asia Pacific or North America. Primary attribute of CGPC PVC H-73: Impact Resistant. Typical applications include: Consumer Goods Film Furniture Sheet Wire & Cable&& Product Description Supplier…
About Flexible and non-halogenated flame retardant extrusion grade intended for evaluation in applications such as jacket of HD 21.14 flexible cables. Flame retardant performance capable of meeting EN 50265-2-1 requirement. 88 Shore A hardness. Processing typically conducted on standard extrusion…
About NuSil Technology’s unrestricted materials may be considered for long-term implant applications (greater than 29 days). HCRs can be used for extrusion of tubing and profi les (rod or ribbon), in calendared sheeting for die-cutting, or in compression or transfer…
About T60-800-119 is a narrow molecular weight distribution high density polyethylene homopolymer intended for general purpose injection molding applications requiring good rigidity and a glossy surface finish. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.&&…
About Product Description Generic POM Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Durethan® BKV130GIT 900116 DUS008 (Dry) PA 6, 30 % glass fibers, injection molding, improved impact strength, GIT/WIT&&Durethan® BKV130GIT 900116 DUS008 PA 6, 30 % glass fibers, injection molding, improved impact strength, GIT/WIT&&Durethan® BKV130GIT 900116 DUS008 PA…
About High Impact Strength, Softness&& Product Description Supplier LOTTE Generic PP homopolymerization Material Status Commercial: Active Features High impact resistance,Block Copolymer,Soft Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.91 g/cm³ ASTM D792 Melt Flow…
About The product is no rules structure and thermoplastic elastomer, almost completely no crystallization, has low temperature and plasticizing Mooney viscosity. Processing liquidity is very good, has very good heat resistance, weather resistance, anti-bending, excellent fire resistance,it can be used…
About Polypropylene PPH 7059 is homopolymer with a Melt Flow Index of 12 g/10 min. Polypropylene PPH 7059 is intended for extrusion of staple fibres for nonwoven applications. It exhibits excellent spinning properties and optimal thermal bonding performance. Polypropylene PPH…
About Decreased shrinkage against the BT types, increased heat application up to 170°C. Increased modulus in tension – strength of the material. PA matrix reduction. Application eg. for tools, filling-in dowells. PA for injection moulding with the content of 20%…