About EVA copolymer ALCUDIA® PA-538 is suitable for extrusion and injection moulding applications. This material combines flexibility and toughness. It contains antioxidant additives. TYPICAL APPLICATIONS Extrusion Blow moulding Injection moulding Microcellular foams Recommended melt temperature below 200°C to avoid the…
About ALTECH® PA6 + ASA A 4010/212 MR10 IM UV is an Acrylonitrile Styrene Acrylate + PA (ASA+Nylon) product filled with 10% mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.…
About Kingfa PA6-G50 HSBK102 is a Polyamide 6 (Nylon 6) material filled with 50% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa PA6-G50 HSBK102 are: Flame Rated Good Aesthetics Good…
About Eltex® TUB 172 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipe for gas applications. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: PE 80 Yellow pipe compound…
About SUMIKATHENE® E FV203 is a Metallocene Linear Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blown film. Important attributes of SUMIKATHENE® E FV203 are: Good Sealability…
About Lupolen 3621 M RM Black is the black compound version of the new generation hexene linear medium-density polyethylene LP 3621 M RM for rotational molding of a variety of articles. The product exhibits excellent ESCR, high impact strength at…
About EBA ALCUDIA® PA-1240 is a copolymer suitable for general extrusion, injection moulding and compounds where good processability, flexibility and very good mechanical properties are required. The butyl acrylate content is 12%. It contains antioxidant additives. TYPICAL APPLICATIONS Extrusion (profiles,…
About ASA Compound, UV stabilized&& Product Description Supplier A. Schulman Generic ASA Material Status Commercial: Active Features Weather resistance is good,Good liquidity,HB Availabilitys Africa & Middle East ,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About Features: High gloss Good transparency&& Product Description Generic PP copolymer Material Status Commercial: Active Features Good Clarity,Good surface appearance Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.900 g/cm³ ISO 1183…
About (DOMAMID 6STC5) Polyamide 6, highly toughened also at low temperatures, for injection moulding.&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Good flexibility,Low temperature toughness Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…