About ADMER™ AT2831E is a PE-based adhesive for 3-layer steel pipe coating with a strong adhesion between PE and epoxy materials.&& Product Description Supplier Mitsui Generic MAH-g-PE增容剂 Material Status Commercial: Active Features Good bond Availabilitys Africa & Middle East ,Europe…
About Plaslube® PC / ABS 2002 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated Low Gloss&& Product Description Generic PC+ABS Material Status Commercial: Active…
About APEX® 08-A0349A-83 NT NP is a Flexible Polyvinyl Chloride material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Primary attribute of APEX® 08-A0349A-83 NT NP: Plasticized. Typical applications include:…
About Starflam PX06004 is an Unfilled, Halogen Free and Red Phosphorous Free, Flame Retardant, Polyamide 6 Injection Molding Resin&& Product Description Supplier Ascend Generic PA6 Material Status Commercial: Active Features Low to no phosphorus content,Halogen free,V-0,Flame Characteristics Availabilitys Latin America,Africa…
About PolyOne’s Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium carbonate, glass and talc to provide a desired balance of properties including stiffness, durability, impact…
About SABIC® LLDPE 318BJ is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJ exhibit…
About Product Description Supplier SH shenma Generic PA66 Material Status Commercial: Active Features Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Density 1.32 g/cm³ ISO 1183 Shrinkage rate 0.5-1.0 % ISO 294/4 MECHANICAL Nominal value Unit Test method…
About Yuyao PBT 3055G30 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific. Applications of Yuyao PBT 3055G30 include electrical/electronic applications, automotive and engineering/industrial parts.…
About E8201 is a crosslinkable, strippable semiconductive compound, designed for EPDM rubber insulated cables and use in both dry and steam curing processes. E8201 meets the requirements as below, when optimal processing extrusion and end testing procedure are used: AEIC…
About DESCRIPTION: Homopolymer for extrusion. FEATURES: Low water carry-over. Produced without animal derived components or phthalates. APPLICATIONS: Cast film.&& Product Description Supplier INVISTA Generic PP homopolymerization Material Status Commercial: Active Features Homopolymer,Low water portability,ADCF Availabilitys North America Process Methods Extrusion…