About Hylar® 5000 is a crystalline high molecular weight powder form of polyvinylidene fluoride (PVDF) specifically designed for solvent-based coatings to provide improved gloss. It forms mechanically strong and tough films that have a broad useful temperature range. These films…
About AXELERON™ CS 7540 NT CPD is a linear low-density polyethylene (LLDPE) extrusion compound (“CPD”) produced by the UNIPOL™ PE Process. It is a general purpose insulation that can be used as a high speed telephone singles insulation (air-core cable…
About Glass Fiber&& Product Description Generic TPU-酯 Material Status Commercial: Negative Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.29 g/cm³ ASTM D792 Shrinkage rate MD：3.2…
About POCAN® B1305 000000 PBT, non-reinforced, injection molding&&POCAN® B1305 000000 PBT, non-reinforced, injection molding&&POCAN® B1305 000000 PBT, non-reinforced, injection molding&& Product Description Supplier LANXESS Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys Africa & Middle…
About CAPRAN MEDALLION® MT1200 is a 0.47 mil (12 micron) biaxially oriented nylon 6 film with a metallized barrier coating well suited for packaging and balloon applications.&& Product Description Supplier Honeywell Generic PA6 Material Status Commercial: Active Features Good Rigidity,Good…
About P-50 is a high durometer, platinum-catalyzed, RTV-2 silicone rubber designed for casting polyurethane and epoxy molds. It is easy to mix and de-air, and will cure with virtually no shrinkage. The speed at which the rubber hardens can be…
About 02X02 is a HP-VLDPE grade for cast coextruded film, as cling layer and for injection molding application like bumper energy adsorber. Features HP-VLDPE grade for cast coextruded film Applications Film and injection molding grade Film Bumpers&& Product Description Supplier…
About Product Description Supplier Aramco Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About Alcryn® 2265 TR is a Melt Processable Rubber (MPR) product. It can be processed by blow molding, compression molding, extrusion, or injection molding and is available in Asia Pacific, Europe, or North America. Applications of Alcryn® 2265 TR include…
About Hifax TRC 221X 3001 is a 20% talc filled PP copolymer, with high flowability, excellent impact/stiffness balance and very low CLTE. Product is available as a customized color matched, pellet form. This grade is delivered in 3001 color version.…