About Blend of SIS triblock and SI diblock copolymer Medium styrene copolymer Outstanding thermal stability Outstanding melt processability Complies with U.S. FDA 21 CFR 177.1810; Consult the regulations for complete details VECTOR 4215 is a blend of SIS triblock and…
About A two component, room temperature-curing, thermally and electrically insulating epoxy. It can be used for adhesive, sealing, potting or encapsulation applications found in semiconductor, electronics, optical and medical devices.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Features Thermal…
About NuSil Technology’s unrestricted materials may be considered for long-term implant applications (greater than 29 days). Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared…
About Plasticized VESTAMID® polyamide 12 compounds Characterization: low viscosity, plasticized, heat stabilized, with mold release agent Applications: cable ties, fastening elements In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar…
About Low flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. For blow molding applications.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Low…
About 55 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.…
About NIPOL® NITRILE ELASTOMERS (NBR) are recommended when oil or solvent resistance is needed for the proper functioning of rubber parts. Nipol nitrile elastomers are available in a broad range of acrylonitrile content to ensure optimal performance in a variety…
About L10G-00 is a medium melt flow rate, barefoot impact copolymer polypropylene designed for injection molding, compounding applications, and consumer products. Characteristics of this grade include high impact resistance and high flexural modulus. This material meets the requirements of the…
About The AD/POM Series is your material solution for applications with excellent adhesion to POM. The compounds are available in natural and black colors. Typical applications Bumpers Function and design elements Grommets Handles (hand tools and power tools etc.) Seals…
About Carbon Fiber – PTFE Lubricated&& Product Description Generic PTT Material Status Commercial: Negative Features Lubricating,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.57 g/cm³…