About Panlite®L-1225R ( HF05084R )该牌号为红外穿透PC。Panlite ® 光传感器用等级、除了拥有 Panlite ® ® 的耐冲击性、耐热性、尺寸稳 定性以外，还具有能够吸收波长约 700nm 以下的光线，并且能够透过 700nm 以上近红外光的性质。基于这个特性，该材料可应用于光传感器的外壳部品。 Panlite ® ® 光 传感器用等级的特征 Ⅰ ． 在近红外光领域具有优异的光透过性。 Ⅱ ． 高耐热性，优异的热安定性。 Ⅲ ． 优异的脱模性、流动性 。 Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial:…
About Staramide BG7H is a Heat Stabilized, 35 % Glass Fiber Reinforced Polyamide 6 Injection Molding Resin&& Product Description Generic PA6 Material Status Commercial: Active Features Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection…
About P-125 is a translucent, high tear strength, platinum-catalyzed, RTV-2 silicone rubber, which was designed for casting parts where visual inspection is required. It is easy to mix and de-air, and will cure with virtually no shrinkage. The speed at…
About Polyblend, a blend of acrylonitrile butadiene rubber (NBR) and polyvinyl chloride (PVC), is itself resistant to ozone without the additions of antioxidants. Compared with NBR, Polyblend has the following properties. Improved oil, ozone, and chemical resistance Better extrudability and…
About HI2000 is a high density polyethylene for injection molding. HI2000 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3.2a. APPLICATIONS: Caps and closures for mineral…
About SE87 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and…
About LGG 1052 is a medium flow GPPS grade with least blue tinge. Applications: Stationery, Disposables, Wall clocks, Novelties, Bead bangles, Imitation Jewellery etc.,&& Product Description Supplier LG Chemical Generic PS (GPPS) Material Status Commercial: Active Features Moderate liquidity,HB Availabilitys…
About Durethan® AKV35 000000 (Dry) PA 66, 35% glass fibers, injection molding&&Durethan® AKV35 000000 PA 66, 35% glass fibers, injection molding&&Durethan® AKV35 000000 PA 66, 35% glass fibers, injection molding&& Product Description Supplier LANXESS Generic PA66 Material…
About High impact, Hydrolysis resistance&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features High impact resistance,Hydrolysis stability,V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 120 MPa Internal Method Tensile strain…
About ULTEM™ AUT210 resin Transparent Polyetherimide (Tg 227 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 212 degC (SABIC IP method). Resin is subject to U.S.…