About Total Petrochemicals Polypropylene 5947WZ is an impact copolymer with a Melt Flow of 105 g 5947WZ is characterized by excellent stiffness and impact resistance, excellent antistatic properties, as well as extremely good flow properties to allow faster cycling through…
About Neoflon® EFEP RP-5000AS, a functionalized and onductive EFEP, was developed primarily for tubing extrusion. It can be coextruded with other resins such as polyamides directly. It has excellent processability.&& Product Description Supplier Daikin Fluorochemicals Generic 含氟聚合物 Material Status Commercial:…
About Product Description Generic PA10T Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.51 g/cm³ GB/1033 MECHANICAL Nominal value Unit Test method tensile strength 225 MPa GB/1040 Tensile strain 1.54 % GB/1040 bending strength 320…
About 3M™ Dyneon™ PFE 133TBZ is a technically advanced high temperature perfluorelastomer (HT PFE). It is designed to meet the challenges of higher temperature plasma applications. It is classified as FFKM per ASTM D1418. Its fully fluorinated backbone structure provides…
About Keliren® elastomers called rubber grades of CPE products are formulated into quality extruded, molded, and sheet rubber goods that satisfy critical needs for heat, oil and chemical resistance, compression set, toughness and durability, processibility, and value-related economics. Application: Wire…
About TECHLEN M1272U is a Polypropylene material. It is available in Asia Pacific. Primary attribute of TECHLEN M1272U: UV Stabilized. Typical application of TECHLEN M1272U: Automotive&& Product Description Generic PP not specified Material Status Commercial: Active Availabilitys Asia Pacific Technical…
About SERIES 20 STANDARD ESTER Products based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.&& Product Description Generic TPU-酯 Material Status Commercial: Active Features…
About Unfilled Standard flow Polyetherimide (Tg 217?C). Specific grade-colors aredesigned and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved.&& Product Description Supplier SABIC Generic Polyetherimide Material Status…
About AKROMID® B3 1 L natural (4685) is an unreinforced and heat stabilised polyamide-blend with a reduced density compared to standard PA6 Technical components in the automotive and electronic industry, where a weight and cost reduction is required&& Product Description…
About SIMONA® E-CTFE是一种三氟氯乙烯-聚乙烯产品,。 它,在北美洲、拉丁美洲或欧洲有供货。 典型应用领域为:食品接触应用。 主要特性为:可接触食品。&& Product Description Generic ECTFE Material Status Commercial: Active Features Food contact compliance Availabilitys North America,Latin America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.68 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test…