About Product Description Supplier Daicel Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 23 ℃, in water 1.35 g/cm³ ASTM D792 Shrinkage rate Contest Lufa 0.1~0.5 % ash content 800℃ 30 % D5630…
About apizero® AZ FC 200 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It can be processed by injection molding and is available in Europe. Typical application: Consumer Goods. Primary characteristic: crosslinkable.&& Product Description Generic EVA Material Status Commercial: Active…
About ENGAGE™ 8157 Polyolefin Elastomer is an ethylene-octene copolymer that has excellent flow characteristics and provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE) and is widely used in TPO applications where excellent low temperature impact properties…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…
About ATTANE™ SL 4102G Ultra Low-Density Linear Polyethylene Copolymer is an ethylene-octene copolymer. It is specifically designed for the production of blown film requiring a combination of good processability, outstanding sealing, hot tack and toughness, coupled with excellent optical properties.…
About LL515 is a blend of LDPE and LLDPE haviing properties which incorporates some advantages of each resin type. End uses include shopping bags, other soft goods bags and laminations.&& Product Description Generic LDPE+LLDPE Material Status Commercial: Active Availabilitys North…
About Homopolymer Characteristics: Processability Stiffness Applications General injection&& Product Description Supplier Hyosung Generic PP homopolymerization Material Status Commercial: Active Features Homopolymer,Excellent Processability,Good Rigidity,Ultra high liquidity,high-rigidity Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About L-PLA = poly(L-lactide) Materials available: B6002-2: Inherent Viscosity – 0.90 to 1.20 IV This product is soluble in dicholormethane, cholorform, and hexafluoroisopropanol.&& Product Description Supplier DuPont Generic PLA Material Status Commercial: Active Features Renewable resources,Biodegradable Availabilitys Africa & Middle…
About The LTP Series is your material solution for sealings requiring high temperature resistance. The compounds are characterized by an excellent adhesion to PP. Typical applications Fastenings Grommets Seals Material advantages Adhesion to PP Excellent heat resistance up to 140…
About Product Description Supplier Honeywell Generic 润滑剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…