About TAISOX® 6030F is a Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America. Typical applications include: Agricultural Film Wrap&& Product Description Supplier fpc-tw Generic LDPE Material Status Commercial: Active Features Low density Availabilitys North…
About Neoflon® FEP NP-140PB compound was developed for foamed extrusion as insulation for coaxial cables and twisted pair cables for data, broadband, and microwave, etc. communication.&& Product Description Supplier Daikin Fluorochemicals Generic FEP Material Status Commercial: Active Features Foaming performance…
About CPE-30-11 REV 2 is a heavy duty thermoplastic jacket for power and control cables. It is suitable for VW1 and tray fire rated applications. CPE-30-11 REV 2 offers high tensile and superior fluid resistance.&& Product Description Supplier Polyone Generic…
About tefabloc® TP SD 310 40A is a Thermoplastic Elastomer (TPE) material. It is available in Europe or North America for injection molding. Important attributes of tefabloc® TP SD 310 40A are: RoHS Compliant Chemical Resistant Food Contact Acceptable Good…
About KetaSpire® KT-820UFP is the low flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-colored, ultra-fine powder form. This ultra-fine PEEK powder is suitable for water-borne coatings, electrostatically driven powder coatings and resin pre-impregnation of continuous fiber composites. This…
About Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.21 g/cm³ ASTM D792 Melt Flow Rate 300℃，1.20kg 20 g/10min ASTM D1238 Shrinkage rate MD：3.2 mm 0.50 to 0.70…
About Durethan® B 31 SK 000000 (干燥 ) PA 6, non-reinforced, injection molding&&Durethan® B 31 SK 000000 PA 6, non-reinforced, injection molding&& Product Description Supplier LANXESS Generic PA6 Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle…
About High performance thermoplastic material, 30% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low flow, FDA food contact compliant, colour black. Applications for higher strength and stiffness in a static or dynamic system. Excellent…
About Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® LBG resin is a semi-crystalline copolymer. Kynar Flex® LBG is considered a high molecular weight VF2 based copolymers – specifically designed for application in the lithium ion battery market.&& Product…
About Catalyst CT/7 UV is a polyolefin based masterbatch to be used with cable silane crosslinkable compounds in the amount suggested for each material. Developed for Polidan®, Polidiemme® and Cogegum® GFR series compounds, it is suitable for most severe long…