About B53-35H-011 is a high density polyethylene copolymer developed for blow molding applications. This product is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material meets…
About AXELERON™ CX 1253 NT CPD is a medium molecular weight, low density polyethylene insulation compound (“CPD”) resin produced to a demanding set of electrical property specifications. DFDA-1253 Natural can be used as part of the resin system in the…
About Starex SR-0300 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Starex SR-0300 include automotive and electrical/electronic applications. Primary characteristic: heat resistant.&& Product…
About Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS2, 01-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; improved wear performance; high resistance to thermal and oxidative degradation; reduced thermal…
About Alathon H6017 provides good processing characteristics and exhibits excellent toughness and color as well as low odor and good molded-part stability. Typical applications include housewares, caps, closures and various food containers.&& Product Description Supplier LyondellBasell Generic HDPE Material Status…
About Polystyrene 945E: Is a super high impact polystyrene designed for applications requiring extra toughness without sacrificing mechanical properties, excellent falling dart impact which, combined with the high gloss, make it a candidate for some ABS applications. This polymer is…
About LOFEX ® A41AA is Polyester film is optically clear and both sides acryl treated with enhanced adhesion to inks and coatings. So, it can use by MTP, graphic. It has excellent properties by tensile strength, proper elongation and the…
About ELTEX® MED 100-MG03 is a non-nucleated polypropylene homopolymer intended for injection moulding, extrusion and thermoforming converting processes requiring medium melt flow and good parison strength. ELTEX® MED 100-MG03 is produced according to Good Manufacturing Practices, and is available in…
About POLYSTYRENE (PS) COMPOUNDS (CPD) 818E is a high impact brominated flame retardant polystyrene for use in injection moulding. PS CPD 818E can be supplied in both natural and coloured forms. Main Characteristics: UL94 V0 @ 1.6 mm for black…
About Features: High Impact Strength, Plating Applications: Automotive parts (Panel, Mesh bumpers), Helmets, Plating parts, etc&& Product Description Supplier Kumho Petrochemical Generic PC+ABS Material Status Commercial: Active Features HB,High impact resistance Availabilitys Europe,North America,Asia Pacific Technical Data PHYSICAL Nominal value…