About Thermoset Plastics 321 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics 321 are: Insulating Rigid Typical application of Thermoset Plastics 321: Wire & Cable&& Product Description…
About KetaSpire® KT-880SFP is the high flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color super-fine powder form. This super-fine PEEK powder is suitable for water borne coatings, electrostatically driven powder coatings, and resin pre-impregnation of continuous fiber composites.…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…
About Futerro® PLA polymer is a thermoplastic fiber-grade resin from annually renewable resources. Available in pellet form, it is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. Futerro® PLA polymer…
About Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Europe Process Methods Injection Molding Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 80.0 °C Recommended maximum moisture content…
About Viton® GLT-600S fluoroelastomer is a 64% fluorine, peroxide-cured, low temperature fluoroelastomer. GLT-600S utilizes the latest technology, Advanced Polymer Architecture (APA), which includes a novel peroxide cure site along with an optimized molecular weight distribution. Features Cures exceptionally fast to…
About Durethan® ACF30XH2.0EF 901510 (Dry) PA 66, 30 % glass fibers/carbon fibers, injection molding, improved flowability, heat-aging stabilized, improved electrical conductivity&&Durethan® ACF30XH2.0EF 901510 PA 66, 30 % glass fibers/carbon fibers, injection molding, improved flowability, heat-aging stabilized, improved electrical…
About Grilon® ELX 50 HNZ is a Polyamide 6X (Nylon 6X) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blow molding or extrusion. Important attributes of Grilon® ELX 50 HNZ…
About Elvaloy® AC 2618 is a copolymer of ethylene and ethyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins.&& Product Description Supplier DOW Generic EEA Material Status Commercial: Active…
About (DOMAMID 6AF) Polyamide 6, improved flowability, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO…