About TYRIN™ CM3630 E is a medium viscosity chlorinated polyethylene with low crystallinity. It is used as an elastomer in thermoset formulations for cable jackets and hoses. It is available in powder form. A benefit of the resin is its…
About PC/ABS blend, injection molding grade that poses a good combination of impact, stiffness and toughness. Vicat B120 = 130°C Benefits: Easy Flow Very high impact up to -40°C Low emission grade UV stabilized grade Good stability even with high…
About Mineral filled PC/PET blend with high heat dimensional stability, low shrinkage and low CTE, especially for painted applications&& Product Description Supplier SABIC Generic PC+PET Material Status Commercial: Active Features Low CLTE,Good Dimensional Stability,Sprayable,Low contractility Availabilitys North America,Europe Process Methods…
About Sofprene T® 550100A65 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Sofprene T® 550100A65: REACH Compliant.&& Product Description Supplier Celanese Generic SBS…
About Makrolon® GP sheet is a polished surface, UV stabilized, transparent polycarbonate product. It features outstanding impact strength, superior dimensional stability, high temperature resistance, and high clarity. This lightweight thermoformable sheet is also easy to fabricate and decorate. Makrolon GP…
About Durethan® BM230H2.0 901510 (Dry) PA 6, 30 % mineral, injection molding, heat-aging stabilized, low tendency to warp, isotopic properties&&Durethan® BM230H2.0 901510 PA 6, 30 % mineral, injection molding, heat-aging stabilized, low tendency to warp, isotopic properties&&Durethan® …
About Product Description Supplier CHI MEI Generic Polycarbonate Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.20 g/cm³ ISO 1183 Melt Volume Rate 300℃，1.2 kg 10.0 cm³/10min ISO 1133…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data THERMAL Nominal value Unit Test method Hot deformation temperature 103 ℃ ASTM D-648 Flammability HB UL 94 Other performance Nominal value Unit Test method Residual rate 30…
About Celcon® WR90Z is a standard nominal 9 melt flow rate based acetal copolymer stabilized to provide maximum ultraviolet radiation resistance in outdoor applications while retaining a good balance of properties. Available in black only.&& Product Description Supplier Celanese Generic…
About NYLOY® MG-0023N-V0 is a Polyamide 66 (Nylon 66) material filled with 23% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of NYLOY® MG-0023N-V0 are: Flame Rated Flame Retardant&& Product Description Supplier…