About POCAN® KU 1-7635 POS 151 000000 PBT+PC, 30 % glass fibers, injection molding, low tendency to warp, improved surface finish, UV-stabilized&& Product Description Supplier LANXESS Generic PC+PBT Material Status Commercial: Active Features Weather resistance is good,Low warping,Good surface…
About PELPRENE™ P70B is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in North America. Characteristics include: Flame Rated Chemical Resistant Copolymer Good Processability Heat Resistant&& Product Description Supplier TOYOBO Generic TPEE Material Status Commercial: Active Features Excellent Processability,Copolymer,Heat…
About KE-7022 U is intended for applications where excellent high heat resistance is required. This product is intended for high temperature service as -55 ~+ 315 °C (-67 ~ +600 °F) Typical Applications PPC Rollers.&& Product Description Supplier Shin-Etsu Generic…
About Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Excellent Processability,Good Dimensional Stability Technical Data MECHANICAL Nominal value Unit Test method Flexural strength Flame retardant grade (0.25 mm) 120 ASTM D2176-69 0.50 mm 30 ASTM D2176-69 Tensile…
About 10 Melt, Prime Polycarbonate, UV Stabilized, Mold Release, UL-94 HB Rated, Water Clear&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,Good stripping performance,HB Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method…
About NYLOY® MS-0100B is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific or North America for injection molding. Primary attribute of NYLOY® MS-0100B: Impact Modified.&& Product Description Supplier Nytex Generic PA66 Material Status Commercial: Active Features…
About LNP THERMOCOMP RF00CSXZ is a compound based on Recycled Nylon 66 resin containing 60% Glass Fiber. Added features of this material include: Heat Stabilized.&& Product Description Supplier SABIC Generic PA66 Material Status Commercial: Active Features Heat Stabilized Availabilitys North…
About POLYNIL® P50 FL is an unreiforced nucleated Polyamide 66 (Nylon 66) for injection molding, UL listed V2. This general pourpose 2.7 viscosity Polyamide 66 resin is designed for fast cycling.&& Product Description Supplier Nilit Generic PA66 Material Status Commercial:…
About Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Heat Stabilized,Ductility,High Viscosity Availabilitys Europe,Africa & Middle East Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 1830 MPa ISO 527-2/1A tensile strength ISO 527-2/1A yield 46.0…
About AFFINITY™ PT 1451G1 Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow, is specifically designed for extrusion coating and other cast extrusion processing. AFFINITY PT 1451G1 Polyolefin Plastomer is a tough and high performance and low temperature sealant. Its…