About Meets ATEX-regulations&& Product Description Generic PC+ABS Material Status Commercial: Active Features Antistatic property,HB Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.13 g/cm³ ISO 1183 Shrinkage rate MD：3.0 mm 0.50 to 0.90…
About TA 2114 HD catalyst masterbatch is used with Kafrit NA cross-linkable PEX-b compound TA 1117 HD to produce pipe, tubing and various profiles. TA 2114 HD contains a crosslinking catalyst which will complete the Sioplas System when extruded with…
About Polypropylene compound obtained by complete recycling of industrial scrap, 20%filled with talc. Flowability, for injection molding of big dimension articles, good impact strength and good stiffness. Available just in black version.&& Product Description Generic PP copolymer Material Status Commercial:…
About Fluorinated ethylene-propylene powder, as a copolymer of tetrafluoroethylene and hexafluoropropylene, has good heat stability, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be processed by a thermoplastic processing method. It can mix with telfon powder.…
About Grilamid® XE 4073 nat is a Polyamide 610 (Nylon 610) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for calendering, casting, extrusion, injection molding, profile extrusion, or sheet extrusion. Primary…
About Solef® 5120 PVDF is a medium viscosity grade that gives improved adhesion ideal for its usage in lithium batteries.&& Product Description Supplier Solvay Generic PVDF Material Status Commercial: Active Features Good bond Availabilitys Africa & Middle East ,North America,Latin…
About Product Description Generic TPU Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness Shaw’s A 75 ASTM D2240，ISO 868 tensile strength 55 MPa ASTM D412，ISO 527 tear strength 220 N/mm² ASTM D624，ISO 34 Tensile…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features Good flexibility,Smoothness,High anti-blocking,Machinable,Good Tensile Strength,Low density,Butylene copolymer,Puncture Resistant Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.918 g/cm³ ASTM D792 Melt Flow Rate…
About General Purpose, Vicat 130°C&& Product Description Supplier Mitsubishi Generic PC+ABS Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 2300 MPa ISO 527-2 tensile strength yield 55.0 MPa…
About This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability Very high line speed at low coating weights Processability at lower extrusion temperature High temperature extrusion stability Excellent drawdown characteristics Low neck-in Typical extrusion coating…