About Clariant Nylon 6/6 PA-113 is a Polyamide 66 (Nylon 66) material. It is available in North America for injection molding. Important attributes of Clariant Nylon 6/6 PA-113 are: Flame Rated Chemical Resistant Corrosion Resistant Flame Retardant Good Processability Typical…
About Hostalen PP H2250 36 is a polypropylene homopolymer, grey colored similar to RAL 7032 (pebble grey) and is typically used by customers for the application of extruded or compression molded sheets. For further details about the suitable applications for…
About KM-303IB is a propylene-ethylene block copolymer designed for film applications. Well designed EP rubber and managing polymerization process to reduce contaminations gives KM-303IB an extremely low fish-eye level Food Contact Application: KM-303IB meets the FDA requirements in the Code…
About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 186 Mpa ASTM D638 Dielectric strength 1 mm 45 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…
About TECHNYL eXten® D 437P Natural is an unfilled polyamide 6.10, medium viscosity, unfilled, plasticized, UV and heat stabilized, for extrusion applications. This polyamide 6,10 for extrusion is specially performing where high flexibility and toughness are requested. It is specially…
About 30% 玻纤增强PBT + PC。 出色的机械和热性能。非阻燃。 降低翘曲特性。 应用与VALOX 420R相同 Product Description Supplier SABIC Generic PBT/PC Material Status Commercial: Active Features Good Rigidity,Low warping,Heat Resistance, Good,Glass fiber reinforced Technical Data MECHANICAL Nominal value Unit Test method tensile strength Fracture, Type I,…
About TECAPET®PET is an unreinforced, semicrystalline thermoplastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro-mechanical parts. Because TECAPET®PET…
About TRAMID® 4210G30 is a Polyamide product. It is available in Asia Pacific, Europe, or North America.&& Product Description Supplier Samyang Generic PA Not specified Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test…
About General Purpose&& Product Description Generic SEBS Material Status Commercial: Negative Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.890 g/cm³ ASTM D792 Shrinkage…
About Polypropylene PPH 6088 is a homopolymer with a Melt Flow Index of 9 g/10 min for the cast extrusion of films with excellent optical properties and good sterilizability. Polypropylene PPH 6088 is formulated with slip and anti-block agents. It…