About Product Description Supplier Techno Generic ABS Material Status Commercial: Negative Features HB Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.06 g/cm³ ISO 1183 Melt Volume Rate 220℃，10 kg 4.00 cm³/10min ISO 1133 Shrinkage…
About Product Description Supplier Kolon Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Low odor,HB Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO 1183 Melt Flow Rate 190℃，2.16kg 9.5 g/10min ISO…
About EXACT 4150 is an ethylene-based hexene plastomer produced using ExxonMobil Chemical’s EXXPOL® Catalyst Technology. EXACT 4150 is designed for multilayer coextruded cast film applications requiring low sealing temperatures, high oxygen transmission, and high toughness. Typical applications include seal layers…
About Iupilon® MB2112N is a Polycarbonate + Polyester (PC+Polyester) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupilon® MB2112N are: Flame Rated Flame Retardant Chemical Resistant&& Product Description Supplier Mitsubishi Generic…
About DURANEX® 652SA is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 20% mica. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics…
About TEPCON® M270 NAT is an Acetal (POM) Copolymer product. It is available in Asia Pacific. Characteristics include: Flame Rated Fast Molding Cycle High Flow&& Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features High liquidity,Quick molding…
About KetaSpire® KT-820 NL is a low flow grade of unreinforced polyetheretherketone (PEEK) supplied in non-lubricated, natural-color pellet form. KetaSpire® PEEK is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent…
About High flow, high tranparency, low fluorescence grade for light guide and diagnostic consumable, fluidic chip Features High transparency High flow Low fluorescence Very low extractable Low moisture absorption Uses Light guide Diagnostic consumable Microfluidic Mirror&& Product Description Supplier Zeon…
About POLYelast TPE R44 T10 is a Thermoplastic Elastomer (TPE) product filled with 10% talc. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: impact modified.&& Product Description Supplier Polykemi Generic PP+EPDM Material Status Commercial:…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.954 g/cm³ ash content 0.02 Melt Flow Rate 0.9 g/10min MECHANICAL Nominal value Unit Test method tensile strength 30 MPa Tensile strain…