About Tekniflex® VPA series are designed for thermoforming blister packaging for Pharmaceutical products requiring high barrier to moisture. Thermoformable into large cavities; FDA, EU, USP & EP compliant, Pharmaceutical-grade PCTFE film lamination.&& Product Description Generic PVC+PE+PCTFE Material Status Commercial: Active…
About SUMIPEX general-purpose grades can be classified into two basic categories; good flow and heat resistant types. Each grade is available in pellet form. Bead form is available for some grades&& Product Description Supplier Sumitomo Generic PMMA Material Status Commercial:…
About SABIC® HDPE FI0750 is a high molecular high density polyethylene copolymer grade typically used for blown film applications. SABIC® HDPE FI0750 features are balance between toughness and stiffness, good impact properties with low gel level. Typical applications SABIC® HDPE…
About DIALAC® SE40 is an Acrylonitrile Ethylene Styrene (AES) material. It is available in Asia Pacific or North America. Important attributes of DIALAC® SE40 are: Flame Rated RoHS Compliant&& Product Description Supplier Techno Generic 丙烯腈-EPDM-苯乙烯共聚物 Material Status Commercial: Active Features…
About IE-3071 is a rigid polyurethane formulated for hand-batch processing or vacuum cast methods. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA or TDI. It has excellent green strength yielding enhanced…
About Raw materials for medical device fabrication in the Healthcare Industry APPLICATIONS Silastic® BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are heat-cured high consistency silicone rubbers designed for use by customers fabricating medical devices, including those intended…
About Polyether block amide Pebax® MF 5080 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MF 5080 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to…
About CLEARPACT, developed by DIC’s polymerization techniques, is a styrene-based copolymer resin with a superb balance between transparency and moldability. It has a lower water absorption rate when compared to acrylic resins. It can meet the varied needs of our…
About EcoVid-43TF is a Ingeo PLA and bio-composite blend material grade suitable for Thermoforming processes. The material could be frozen to -32C. Composition: Ingeo PLA content with bio-degradable and compostable additives. Applications: EcoVid-43TF is a Thermoforming blend suitable for ambient…
About GF-Reinforced /HB, Standard, GF 30%&& Product Description Supplier Mitsubishi Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.53 g/cm³ ISO 1183…