About Product Description Supplier fpc-tw Generic HDPE Material Status Commercial: Active Features Good Rigidity,High density Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.958 g/cm³ ASTM D1505 Melt Flow Rate 190℃，21.6kg 7 g/10 min ASTM…
About Product Description Generic ABS Material Status Commercial: Active Availabilitys Asia Pacific Technical Data IMPACT Nominal value Unit Test method Izod notched impact strength 23℃，3.2 mm 342 J/m ASTM D256 PHYSICAL Nominal value Unit Test method Melt Flow Rate 220℃，10.0kg…
About KYNAR® 720 is a semi-crystalline low molecular weight pelletized polymer of vinylidene fluoride. It is a versatile engineering plastic with an outstanding balance of physical and chemical properties which qualify it for high performance service in a wide range…
About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder…
About Iupilon® S-1000 is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupilon® S-1000: High Viscosity.&& Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Active Features High…
About Luranyl® HT 220 G2 is a Polyphenylene Ether + PA 66 (PPE+Nylon 66) material filled with 10% glass fiber. It is available in Europe for injection molding. Important attributes of Luranyl® HT 220 G2 are: Flame Rated Heat Resistant&&…
About The Hapflex 500 series offers a full range of soft durometers, from 45 – 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 – 70 Shore D. All are…
About Softell TKG 2039N C12897 is a 25% glass fiber reinforced PP copolymer, with high UV resistance, very good soft touch haptics, high flowability, high dimensional stability and very high scratch resistance. The product is available in different color matched,…
About Daicel PP FP994 is a Polypropylene material filled with 25% glass fiber. It is available in Asia Pacific. Primary attribute of Daicel PP FP994: Flame Rated.&& Product Description Supplier Daicel Generic PP not specified Material Status Commercial: Active Features…
About Formolene® E924F is a “low gel” high molecular weight grade of HDPE designed for high dart impact strength and good processing characteristics. Formolene® E924F is well balanced in overall physical properties and provides good stiffness for thin gauge film…