About Leona™ CR301 is a Polyamide 66 (Nylon 66) product filled with mineral. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ CR301 include electrical/electronic applications and industrial applications. Characteristics include: Flame…
About Product Description Generic POM Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method proportion 1.41 g/cm³ ASTM D792 Forming shrinkage rate 1.5-2.0 % ASTM D955 THERMAL Nominal value Unit Test method Hot deformation temperature 120 ℃…
About Kepital® FL2020 A medium-viscosity grade for general injection molding A 20% PTFE powder-modified grade Suitable for parts requiring low wear and friction&&Kepital® FL2020 20% PTFE powder filled grade, good for general injection molding. FL2020 is suitable for…
About EMERGE™ PC 8600ECO-10 Advanced Resin contains 50% post consumer recycled (PCR) polycarbonate complying with IEEE 1680:2006 certified by TÜV Rheinland. It is a translucent and ignition resistant polycarbonate that does not contain chlorine, bromine, or phosphate additives to comply…
About Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 Listing. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be…
About PA612 semi-rigid, high viscosity extrusion grade. Toughened. Heat stabilized. Black colour. Suitable for extrusion of profiles, tubes and pipes.&& Product Description Supplier Radici Generic PA 6/12 Material Status Commercial: Active Features High Viscosity,Copolymer,Heat Stabilized Availabilitys Africa & Middle East…
About Medium viscosity aliphatic Polyketon&& Product Description Supplier A. Schulman Generic POK Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Product Description Supplier BASF Generic TPU Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier Honeywell Generic 润滑剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC…