About Luranyl® HT 220 G2 is a Polyphenylene Ether + PA 66 (PPE+Nylon 66) material filled with 10% glass fiber. It is available in Europe for injection molding. Important attributes of Luranyl® HT 220 G2 are: Flame Rated Heat Resistant&&…
About Adflex Z 108 S is a reactor TPO (thermoplastic polyolefin) manufactured using the proprietary Catalloy process technology from LyondellBasell. Adflex Z 108 S features a very high softness, a very low flexural modulus and a high melt flow rate.…
About Standard type, Excellent size accuracy&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 120 MPa Internal Method Tensile strain fracture 1.1…
About Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF20 POM copolymer Injection molding type, reinforced with ca. 20 % glass fibers; high resistance to thermal and oxidative degradation; reduced thermal expansion and shrinkage.…
About Iupilon® S-2000F是一种粉状聚碳酸酯（PC）材料。 该产品在北美洲、欧洲或亚太地区有供货,加工方式为:挤出成型。 Iupilon® S-2000F的主要特性为中等粘度，典型应用领域为改性加工行业。一般的包装为650kg/包。常见产地有：三菱瓦斯化学工程塑料（上海）有限公司 Product Description Supplier PETROCHEMICAL Generic Linear low density polyethylene Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table…
About Americas Styrenics MC3650 is a General Purpose Polystyrene material. It is available in North America for extrusion or injection molding. Important attributes of Americas Styrenics MC3650 are: Flame Rated Clarity Crystalline Fast Molding Cycle Food Contact Acceptable Typical applications…
About he HAC8250Z is usually used in the non-spraying parts with the fine or coarse striae.&& Product Description Supplier KumhoSunny Generic PC+ABS Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About 45% Glass Reinforced Polyethylene Terephthalate&& Product Description Supplier DuPont Generic PET Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.70 g/cm³…
About Styrolux® 656C is a clear styrene-butadiene copolymer (SBC) with enhanced flow properties. It is used almost exclusively for injection molding of rigid, tough parts requiring highest levels of clarity and surface gloss. Styrolux® 656C is sterilizable by gamma-rays and…
About Aquivion® E98-05S is a chemically-stabilized (denoted by S-suffix) perfluorosulfonic acid (PFSA) ionomer membrane that exhibits an Equivalent Weight (EW) of 980 g Nominal thickness is 50 microns. Aquivion® PFSA ionomer membranes are melt-extruded products based on the unique Short…