About Kingfa JH830-R310 is a Polycarbonate (PC) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa JH830-R310 are: Flame Rated Good Toughness Halogen Free Heat Resistant Rigid Typical applications include: Lighting Applications…
About 各方面物性均衡，初期密着强度优异的电镀材料。 Product Description Supplier Techno Generic ABS Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.05 g/cm³ ISO 1183 Melt Volume Rate 220℃ 23 cm³/10min ISO 1133 MECHANICAL Nominal value Unit…
About F622R is a medium-low molecular weight PVC homopolymer of interest in both rigid and flexible applications and has established a deserved reputation for low gels, and exceptional early color heat stability. These properties, along with outstanding lot to lot…
About Product Description R50035 series resins are Linear Low Density Polyethylene grades designed to provide excellent stress crack resistance, mechanical properties with high rigidity, toughness, gloss and low warpage. R50035 Series includes following grades: R50035: Non UV stabilized, Pellets R50035E:…
About NORYL GTX GTX679 Resin is a blend of Polyphenylene Ether(PPE) + Polyamide(PA) resin that is mineral filled, conductive, and suitable for injection molding. The conductivity level is optimized to allow for primer-less electrostatic painting. GTX679 has improved impact/elongation and…
About Asahi Kasei Tuftec™ H1043 is a high styrene content SEBS. It can be easily blended with PS and PPE. It is used as a compatibilizer of styrenic resin/olefinic resin blends. It is also suited as an impact modifier of…
About Eastman Tritan™ Copolyester TX1800 is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester…
About POCAN® B1701 000000 PBT, non-reinforced, extrusion, suitable for food-contact&&POCAN® B1701 000000 PBT, non-reinforced, extrusion, suitable for food-contact&&POCAN® B1701 000000 PBT, non-reinforced, extrusion, suitable for food-contact&& Product Description Supplier LANXESS Generic polybutylene terephthalate Material Status Commercial: Active…
About Infino LS-1159 is a Polycarbonate + ABS (PC+ABS) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Characteristics include: Flame Rated Flame Retardant&&…
About SABIC® HDPE CLARENE sets a new standard in optics and aesthetics on brightness. SABIC® HDPE CLARENE 3H673 is a material with a high molecular mass, supplied as pellets. This product is not intended for and must not be used…