About Daplen EE168AI is a 10% mineral filled polypropylene compound intended for injection moulding. This material has an excellent balance between impact strength and stiffness and is easy to process. Applications Daplen EE168AI has been developed especially for the car…
About Has the same excellent balance of properties as A130 with higher temperature capability and easier flow. Slightly more dimensional stability in vapor phase soldering than A130. Suitable for some infrared SMT applications. 30% glass reinforced. Chemical abbreviation according to…
About PA66 30% glass beads filled injection moulding grade. Natural colour. Suitable for parts requiring low warpage and good surface aspect.&& Product Description Supplier Radici Generic PA66 Material Status Commercial: Active Features Low warping,Good surface appearance Availabilitys Africa & Middle…
About DuPont™ Tefzel ® fluoropolymer 200 is a general purpose resin available in translucent, 2.5-mm (0.1-in.) pellets. Compared to other grades of Tefzel ®, its most unique features are an intermediate flow rate and a balance of properties that make…
About Product Description Supplier SIBELCO Generic 开口剂 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About TECHNO ABS 110 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Rigid&& Product Description Supplier Techno Generic…
About LAPEROS® A430 is a Liquid Crystal Polymer (LCP) product. It is available in Asia Pacific. Characteristics include: Flame Rated High Strength High Toughness Lubricated Wear Resistant&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Features Flame Characteristics,V-0…
About LEMALLOY® C82HL is a Polyphenylene Ether + PA 66 (PPE+Nylon 66) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of LEMALLOY® C82HL: High Flow.&& Product Description Supplier Mitsubishi Generic PPO(PPE)+PA 66…
About 50% Glass Reinforced, UV Stabilized&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features Weather resistance is good,Aromatic Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About 40 MFR LEXAN High Flow Ductile Copolymer&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features High liquidity,Ductility,Copolymer,HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³…