About Very High flow ,Impact resistant, mineral filled grade filled grade designed for exterior applications&& Product Description Supplier LyondellBasell Generic 聚烯烃，共挤薄膜用聚烯烃 Material Status Commercial: Active Features Good Rigidity,High impact resistance,High liquidity Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL…
About The good biocompatibility, processability and the option to pigment make the VESTAKEEP® Care-Grades an ideal material for the fabrication of medical devices with short time contact to human blood, tissue or bone for up to 30 days. Because of…
About Neoflon® FEP NP-1108 was developed for high-speed extrusion of thin coatings of small wire sizes such as plenum cable insulation. It may also be used for injection molding of thin wall parts.&& Product Description Supplier Daikin Fluorochemicals Generic FEP…
About APICAL 500NP is a PI Film material. It is available in Latin America or North America.&& Product Description Supplier Kaneka Generic PI Material Status Commercial: Active Availabilitys North America,Latin America Technical Data PHYSICAL Nominal value Unit Test method Water…
About Product Description Generic PET Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Intrinsic viscosity 0.83±0.015 dl/g GB17931-2003 melting point 248±2 ℃ GB/T 14190-2008 Acetaldehyde content ≤1.0 ug/g GB17931-2003 Carboxyl terminal group ≤35 mol/t GB/T 14190-2008…
About Product Description Supplier LUXI Generic Polycarbonate Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About P series resins are resins succeeding the characteristics of the neat polymer, U-100, and improved in flowability and optical properties. Among many super engineering plastics, the resins are few transparent polymer alloys that have heat resistance. The heat-stable P-series…
About Elastollan® C60AW is a polyester-based thermoplastic polyurethane (TPU) containing a plasticizer. It exhibits excellent abrasion resistance and toughness, good hydrolytic stability, good heat, oil, fuel and solvent resistance. It has excellent damping characteristics and outstanding resistance to tear propagation.…
About TAFMER™ A-4085S TAFMER™ A-4085S is a Polyalphaolefin (PAO) material. It is available in North America. Primary attribute of TAFMER™ A-4085S: Good Flexibility.&&TAFMER™ A-4085S TAFMER™ A-4085S, ethylene based polymer, is a specialty olefinic resin designed to improve impact…
About Lumid® GP3300A(W) is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Lumid® GP3300A(W): Flame Rated. Typical application of Lumid®…