About TOTAL POLYSTYRENE 1050 is an ice color, high heat resistant crystal polystyrene designed for both extrusion and injection applications. This grade can be used pure for the production of sheets and transparent cups or in dilution with other TOTAL…
About CYCOM® 977-2 is a 350°F (177°C) curing toughened epoxy resin with a 260 – 280°F (126 – 138°C) dry and 220°F (104°C) wet service capability. CYCOM 977-2 is formulated for autoclave or press molding. Unidirectional tape and woven fabric…
About Iupilon® MB8700 is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupilon® MB8700 are: Flame Rated High Flow&& Product Description Supplier Mitsubishi Generic PC+ABS Material…
About Torlon® 7130 is an 30% carbon-fiber reinforced grade of polyamide-imide (PAI) resin. It offers high strength and modulus, exceptional creep resistance, and good fatigue resistance. It has thermal expansion characteristics similar to steel, and therefore excellent dimensional stability. Torlon®…
About LEXAN EXL1112T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with high flow characteristics and excellent processability with opportunities for shorter IM cycle times…
About MVR (330°C) 17 cm³/10 min; easy release; suitable for superheated steam sterilisation up to 143 °C as well as for pharmaceutical applications according to United States Pharmacopeia (USP) XXII Class VI; softening temperature (VST/B 120)=170 °C; injection molding –…
About Product Description Supplier Solvay Generic PVDF Material Status Commercial: Active Features Ultra High Viscosity,Homopolymer Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.78 g/cm³ ISO 1183 Shrinkage rate 2-3…
About Product Description Generic PC+ABS Material Status Commercial: Active Features Low odor,V-0 Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.15 g/cm³ GB/T 1033 Melt Flow Rate 260℃, 5Kg 18 g/10min GB/T 3682 MECHANICAL Nominal…
About PPO/PS, 高流动, 优良的耐冲击性能, 优良的成型加工性能 Product Description Supplier Polysyron Generic PPO(PPE)+PS Material Status Commercial: Active Features Excellent Processability,High impact resistance,High liquidity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 0.5~0.7 % ISO 294-4 Density 1.04…
About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties if Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder…