About 通用级 Product Description Supplier LUXI Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method colour 浅色 HG/T2503 Particle content of impurities 3 个/300g HG/T2503 Melt Flow Rate 9 g/10min GB/T3682 MECHANICAL Nominal value Unit…
About 阻燃高抗冲聚苯乙烯,UL94 V-0@3.0mm ,优良的热稳定性及电性能,高刚性 Product Description Supplier Kingfa Generic PS Material Status Commercial: Active Features Good Rigidity,High impact resistance,Flame Characteristics,Heat Stabilized Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 23℃ 0.4-0.6 % ISO 294-3 Melt…
About Exceed™ XP 6056ML is an eXtreme Performance linear low density polyethylene 1-hexene copolymer that is especially designed to have good melt strength and excellent tensile, impact, and puncture properties. The combination of high toughness, melt stability and good sealing…
About Description General Purpose Application IT/OA, E&E, Automotive(Switch)&& Product Description Supplier LG Chemical Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Description General Purpose, High Impact, Good Coloring, Chemical Resistance Application Mobile Phone Housing&& Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Features Solvent resistance,HB,Good coloring,High impact resistance Availabilitys Latin America,Asia Pacific,Europe,North America Process Methods Injection Molding…
About This resin is commonly used for hot melt coating and adhesive applications.&& Product Description Supplier Celanese Generic EVA Material Status Commercial: Active Features Inoxidizability,Copolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.941 g/cm³ ASTM…
About XAREC™ N WA 7030 is a Syndiotactic Polystyrene + PA (SPS+Nylon) product filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.&& Product Description…
About PA66 injection moulding grade. Internally lubricated, fast cycles, easy mould release. Heat stabilized. Natural colour. Suitable for high productivity applications like fasteners, connectors, cable ties.&& Product Description Supplier Radici Generic PA66 Material Status Commercial: Active Features Quick molding cycle,Good…
About Omnix® FC-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-4050 is characterized by high stiffness and strength, very good impact…
About Product Description Supplier LUXI Generic Polycarbonate Material Status Commercial: Active Features Good Clarity,High impact resistance Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from…