About Product Description Supplier TBT Generic PA 9T Material Status Commercial: Active Technical Data IMPACT Nominal value Unit Test method Charpy Notched Impact Strength 9.0 kJ/m² ISO 179/1eA MECHANICAL Nominal value Unit Test method Bending modulus 8245.3 MPa GB/T 1419-1996…
About Queo 0201 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst. CAS-No.: 26221-73-8 Applications Queo 0201 Demonstrated applications include: Seal layers in lamination and flexible barrier films Tunnel linings High strength flexible…
About AFFINITY™ PL 1280G Polyolefin Plastomer is a Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow Plastics. It is specifically designed for use as a sealant layer in flexible structures for the packaging of meat and cheese, dry foods…
About Product Description Generic PC用短纤 Material Status Commercial: Active Features High impact resistance Technical Data PHYSICAL Nominal value Unit Test method fiber diameter ±10 % ISO 1888 Moisture content ≤0.1 % ISO 3344 combustible matter content 0.50±0.15 % ISO 1887…
About Elvaloy® PTW is an ethylene terpolymer, used as and Impact Modifier for a variety of polymers. When used in a CPET tray formulation, Elvaloy® PTW provides both toughening and increases the melt strength of the PET.&& Product Description Supplier…
About Blend of linear SIS triblock and SI diblock copolymer. Contains ~25% SI diblock copolymer. Medium styrene. VECTOR 4213A and VECTOR 4213N styrenic block copolymers are blended products composed of a linear SIS triblock copolymer and an SI diblock copolymer.…
About Kingfa MAC-701 is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa MAC-701 are: Flame Rated Good Processability Chemical Resistant Impact Resistant Typical applications include: Electrical/Electronic…
About DIALAC® E359B is an Acrylonitrile Styrene Acrylate + PMMA (ASA+PMMA) material. It is available in Asia Pacific or North America. Primary attribute of DIALAC® E359B: RoHS Compliant.&& Product Description Supplier Techno Generic ASA+PMMA Material Status Commercial: Active Availabilitys North…
About Product Description Supplier fpc-tw Generic HDPE Material Status Commercial: Active Features Good Rigidity,High density Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.957 g/cm³ ASTM D1505 Melt Flow Rate 190℃，2.16kg 4.0 g/10min ASTM D1238…
About Product Description Supplier Kotec Generic PPS Material Status Commercial: Active Features V-0 Availabilitys North America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.66 g/cm³ ASTM D792 Water absorption rate 23℃，24hr 0.020 % ASTM D570 IMPACT Nominal value…