About TECHNYL® ONE J 60X1 V30 Grey 2663 is a high temperature polyamide based on a non-halogenated flame retardant system, reinforced with 30% of glass fiber with best-in-class fire protection behavior, heat stabilized, for injection moulding. A full yellow card…
About J-580S is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers high transparency, good mechanical balance, high gloss, lower cycle time, super high flow and low…
About ICORENE® 9402 is a thermoplastic elastomer specifically developed for rotational moulding in collaboration with API Spa. This grade offers optimum cold and hot elasticity with UV resistance. It has an excellent appearance with excellent soft touch properties. ICORENE® 9402…
About POCAN® T7391 000000 PBT+PET, 45 % glass fibers, injection molding, improved surface finish, increased temperature peak load&&POCAN® T7391 000000 PBT+PET, 45 % glass fibers, injection molding, improved surface finish, increased temperature peak load&&POCAN® T7391 000000 PBT+PET,…
About Copolyester DN004 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates.…
About Product Description Supplier Shinkong Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.620 g/cm³ ASTM D792 Water absorption rate 110℃/1hrs 0.07 % ASTM D570 Shrinkage rate…
About Vydyne R633H01 is 33% glass-fiber reinforced PA66/6 copolymer resin for superior surface appearance. Available in black, this injection-molding grade resin is lubricated for machine feed and mold release. Vydyne R633H01 has tensile strength and modulus properties just below aluminum…
About This resin is commonly used for hot melt coating and adhesive applications.&& Product Description Supplier Celanese Generic EVA Material Status Commercial: Active Features Inoxidizability,Copolymer Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.930 g/cm³ ASTM…
About MVR (300 °C kg) 34 cm³/10 min; general purpose; low viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active…
About Altuglas® HT 121 is a Polymethyl Methacrylate Acrylic product. It is available in Asia Pacific or Europe. Typical application: Automotive. Primary characteristic: flame rated.&& Product Description Supplier Trinseo Material Status Commercial: Active Features HB Availabilitys Asia Pacific,Europe Technical Data…