About 55 Shore D High Performance Polyester Elastomer with Heat Ageing Protection&& Product Description Supplier DuPont Generic TPC-ET Material Status Commercial: Active Features Good heat aging resistance,Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Film…
About SEETEC VS410 resin is produced by ExxonMobil Chemical’s autoclave process technology. SEETEC VS410 resin, with 26% VA content, is an excellent raw material in the application of foam.&& Product Description Supplier LOTTE Generic EVA Material Status Commercial: Active Availabilitys…
About XP-657 is a water clear, very fast curing two component silicone rubber. The addition cure reaction provides extremely low shrinkage and the cure can be accelerated or slowed by heating or cooling, respectively. It is designed to make very…
About STYRON™ 666D is a General Purpose Polystyrene material. It is available in North America for extrusion or injection molding. Important attributes of STYRON™ 666D are: Flame Rated Food Contact Acceptable Heat Resistant Typical applications include: Medical/Healthcare Food Contact Applications…
About Infino TK-2050HL is a Polycyclohexylenedimethylene Terephthalate (PCT) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Reflectors. Primary characteristic: flame rated.&& Product Description Supplier SAMSUNG…
About Thermal conductive material&& Product Description Supplier DSM Generic PA 46 Material Status Commercial: Active Features Thermal conductivity Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.42 g/cm³ ISO 1183 Shrinkage rate ISO 294-4 TD…
About Product Description Supplier Shin-Etsu Generic PVC, not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.31-1.37 JIS K7112 hardness 5 sec 67-73 JIS K7215 MECHANICAL Nominal value Unit Test method tensile strength Maximum…
About Blow Molding Grade, Heat Stabilized&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Features Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.22 g/cm³ ISO…
About PLAVIS is a super engineering plastic. PLAVIS polyimide has a unique chemical structure with some of the highest properties availiable. Nitrogen bonded to 3 carbons is the critical part of the chain and imparts the plastic with remarkable features…
About Product Description Supplier SKC Generic TPEE Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…