About TECHNYL® A 218 V35 Natural is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal and mechanical properties.&& Product Description Supplier DOMO Generic PA66 Material Status…
About Description General Purpose, High Stiffness, Halogen Free Flame Retardent Application IT/OA(Notebook PC Housing)&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features Good Rigidity,Halogen free,Flame Characteristics,V-0 Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical…
About Polyetherimide reinforced with Glass fiber and PTFE for use in Burn-in Test Sockets (BiTS) Application&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features Lubricating Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Light diffusion grade, (Non corresponding UL96)&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Low Light Diffusion Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About Kingfa PA66-NPG30 is a Polyamide 66 (Nylon 66) material filled with 30% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa PA66-NPG30 are: Flame Rated Flame Retardant Halogen Free Typical…
About Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties. Outstanding tensile strength and high elongation at break, good damping characteristics, a high resilience performance and very good wear resistance. Typical applications Spiral tubing, pneumatic tubing, round belting, technical mouldings e.g.…
About Advanced 40% fiberglass reinforced PPS compound&& Product Description Generic PPS Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.65 g/cm³ ISO 1183 Water absorption rate…
About Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, e-beam and gamma sterilizable. Contains mold release.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features…
About PPE+PS blend. Unfilled. Halogen-Free FR performance. UL94 V0 UL746C F1. Dielectric Strength. Suitable for E/E market indoor/outdoor applications.&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features Halogen free,Flame Characteristics Availabilitys North America Process Methods Injection Molding…
About 此牌号是SABIC PC2200的副牌料，以下参数是正牌料PC2200的数据，仅供参考，不对副牌料的数据误差作任何保证。 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features High liquidity,Heat Stabilized Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792, ISO 1183 Melt Flow Rate 300℃，1.20kg 22…