About NORYL NH7010 resin is a modified PPE-PS blend that exhibits an excellent balance of non-halogenated flame retardance, high heat resistance, good flow, and low specifc gravity for light weight parts. The resin will be available in custom colors and…
About Celcon® acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Chemical abbreviation according to ISO 1043-1: POM Please also see Hostaform® C 2521.&& Product…
About AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound (“CPD”) specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking…
About DuPont™ Fusabond® N525 is an anhydride modified ethylene copolymer. DuPont™ Fusabond® N525 can only be used in the following applications: (1) polyamide (nylon) blends (2) blends for golf ball components (3) blends for “compatibilizing flame retardant fillers in non-halogen…
About Injection molding grade with 20% glass fibers for industrial parts with excellent surface quality, for example external door handles in vehicles, visible sunroof frames, oven door handles, toaster casings, external mirrors, rear screen wiper arms in vehicles and sunroof…
About Product Description Generic 扁平玻纤 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About 15% Glass Reinforced, Impact Modified&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features High impact resistance,HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ISO 1183 Shrinkage rate ISO 294-4…
About Product Description Generic SMMA Material Status Commercial: Active Features Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Density 1.15 g/cm³ ISO 1183 Melt Flow Rate 7.9 g/10min ISO 1133 Shrinkage rate 0.2-0.6 % ASTM D955 Water absorption…
About NIPOL® NITRILE ELASTOMERS (NBR) are recommended when oil or solvent resistance is needed for the proper functioning of rubber parts. Nipol nitrile elastomers are available in a broad range of acrylonitrile content to ensure optimal performance in a variety…
About Bio-Flex ® F 6510 (prev. Bio-Flex® 682CF) Biodegradable compound for cast film extrusion made primarily from renewable resources.&& Product Description Generic 生物可降解聚合物 Material Status Commercial: Active Features Renewable resources,Biodegradable,Food contact compliance,Compostable Availabilitys Europe Process Methods Film extrusion Technical Data…