About Bayfit 566 is a water-blown (MDI)/polyether based foam system used to manufacture high resilience (HR) cold-cure flex molded foam with medium to high load bearing properties. This system is characterized by good flow behavior in a wide variety of…
About 20-2121 is formulated for electronic potting, encapsulating and casting applications. The 20-2121 is a two-component, low viscosity, room temperature curing system. This is an easy to use product that does not contain TDI, MbOCA or Mercury. 20-2121 will cushion…
About 超高耐热 Product Description Supplier Kumho Petrochemical Generic ABS Material Status Commercial: Active Features High Heat Resistance Technical Data MECHANICAL Nominal value Unit Test method tensile strength 23℃，50 mm/min 47 MPa ISO 527 Tensile strain 23℃，50 mm/min 20 % ISO…
About Keliren® elastomers called rubber grades of CPE products are formulated into quality extruded, molded, and sheet rubber goods that satisfy critical needs for heat, oil and chemical resistance, compression set, toughness and durability, processibility, and value-related economics. Application: Wire…
About Mold Max® 60 is a Shore 60A tin catalyzed silicone rubber formulated for applications requiring high heat resistance (up to 560°F/294°C). It features a low mixed viscosity and cured rubber exhibits very low linear shrinkage. Parts A & B…
About Urea- formaldehyde resins fortified with highly refined cellulose as filler, and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. The Urochem 136 Moulding Compounds can be supplied in an almost unlimited range of…
About TAISOX® 2414 is a Linear Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blown film or coextrusion. Important attributes of TAISOX® 2414 are: Antiblock Good Aesthetics Good Sealability Slip Typical applications include:…
About Monprene OM-10165 is a specialty thermoplastic elastomer, available in NAT, BLK, and colors, designed for overmolding applications like grips and anti-skid parts for a variety of consumer and industrial products. Monprene OM-10165 is a medium hardness, low density opaque…
About SARANEX™ 750 is a multilayer barrier film designed for ostomy and similar pouching applications. It is designed with soft haptics and is high frequency (HF or RF) sealable and heat sealable. It has excellent barrier to oxygen, and aromas.…
About PMC-T220NA Black Phenolic is a one-stage, ammonia free molding material offering excellent mold process-ability and optimized Cure cycles. Typical applications include, transformer part, electrical insulation applications, etc.&& Product Description Supplier Chang Chun Generic 酚醛树脂 Material Status Commercial: Active Features…