About PC/ABSHAC8250 is a high impact strength and high heat resistance PC/ABS resin.PC/ABSHAC8250 has been widely used in Auto and Household appliance,such as panel, car lamp and so on.&& Product Description Supplier KumhoSunny Generic PC+ABS Material Status Commercial: Active Features…
About SABIC® HDPE M80064S is an UV stabilized, high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is typically used for injection moulding applications where rigidity, toughness and warp resistance are required. Typical applications. SABIC® HDPE…
About Description General Purpose, High Impact at Low Temperature High Flow, Heat Resistance Application Mobile Phone Housing&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features High liquidity,Heat Resistance, Good,low-temperature impact resistance,HB Availabilitys North America,Latin America,Asia Pacific,Europe…
About Enable 3505MC is a medium density metallocene ethylene-hexene copolymer. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact and puncture. Easier processing and excellent properties lead to significant high pressure LDPE replacement in…
About 车用喇叭罩，扣手低座，储油罐，电动工具壳体 Product Description Generic PA6 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method moisture content 0.7-2.7 Density 1.23±0.02 g/cm³ ISO 1183-1-A ball indentation hardness 160 MPa ISO 2039-1 Filler content 15±1 %…
About Product Description Supplier DOMO Generic PA66/6 Material Status Commercial: Negative Features Halogen free,Good stripping performance,Low to no phosphorus content Availabilitys Latin America Process Methods Injection Molding Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 80…
About Terluran® HI-12 is an injection molding grade of ABS with a very high toughness and easy flow. FEATURES Very high toughness Easy flowing UL 94 HB (1.6 & 3.2mm) APPLICATIONS Home appliances Electrical and electronics Helmets Heel top Motor…
About SABIC® PC PC0700 resin PC0700 resin is a low flow (MFR = 7 at 300°C), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold release. It is…
About PRODUCTS FOR GASKETS These are specially developed TPUs for manufacturing hydraulic gaskets or any other application where at high compression set, resistance to oils and/or high temperatures, is required. Two products based on polycaprolactone (2202-95A and 107- 93A) plus…
About DLG = poly(DL-lactide-co-glycolide) Materials available: B6001-1: Inherent Viscosity – 0.55 to 0.75 IV This product is soluble in dicholormethane, tetrahydrofuran, ethyl acetate, cholorform, hexafluoroisopropanol, and acetone.&& Product Description Supplier DuPont Generic PLA Material Status Commercial: Active Features Renewable resources,Biodegradable,Amorphous…