About Vydyne R550H is general-purpose, heat-stabilized, hydrolysis-resistant, 50% glass-fiber reinforced PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for…
About GPPS123 retains high fluidity and good mould release and allows excellent transparency and gloss.&& Product Description Supplier SECCO Generic PS (GPPS) Material Status Commercial: Active Features Good Clarity,Good surface appearance,High liquidity,Good stripping performance,HB Availabilitys Asia Pacific Technical Data PHYSICAL…
About 3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 4215 is a free-flowing compound based on modified suspension PTFE of the 2nd generation containing 25% electro-graphitized carbon for ram extrusion, compression and automatic moulding. Special Features Increased thermal dimensional stability Increased…
About Product Description Supplier Hersbit Generic TPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method hardness Shaw A, 10s 47 ASTM D2240 Density 1.05 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method tensile strength 4.3…
About SERIES 60 AND 2103 ETHER Products based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.&& Product Description…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About LEXAN 244R resin grade is a medium viscosity multi purpose product with improved flame resistance and release properties. It is also FDA food contact compliant available in limited colors.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active…
About Kingfa JH830 is a Polycarbonate (PC) material. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa JH830 are: Flame Rated Flame Retardant Halogen Free Heat Resistant Impact Resistant Typical applications include: Business/Office…
About Product Description Supplier KumhoSunny Generic PP not specified Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ GB/T 1033.1-2008 Melt Flow Rate 230℃，2.16kg 1100-1300 g/10min GB/T 3682.1-2018 230℃，2.16kg 1700-1900 g/10min GB/T 3682.1-2018 Volatile…
About Product Description Generic PET Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Injection shrinkage rate 0.3-0.6 % ASTM D-955 Density 1.68 g/cm³ ASTM D-792 THERMAL Nominal value Unit Test method Hot deformation temperature (1.82 MPa)…