About Product Description Supplier Kumho Petrochemical Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Index 16 g/10min ASTM D1238 Bulk density 0.28-0.32 g/cm³ Rubber content 48-52 % MECHANICAL Nominal value Unit Test method Tensile Strength…
About Product Description Generic HDPE Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.952 g/cm³ Melt Flow Rate 0.2 g/10min MECHANICAL Nominal value Unit Test method tensile strength 26 MPa Tensile strain…
About Product Description Supplier Audia Material Status Commercial: Active Features Excellent Processability,Elastic,High scratch resistance Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method Tensile Strength Broken BBrk 7.5 MPa ASTM…
About Product Description Supplier Audia Material Status Commercial: Active Features Elastic,High scratch resistance Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 61 Shore A ASTM D2240 Tensile Strength 8.2 MPa ASTM D412 Tensile Stress 100% 1.3 MPa ASTM…
About Product Description Supplier TEIJIN Generic PEN Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ISO 1183 Melt Volume Rate 300℃，1.2 kg 18 cm³/10min ISO 1133 MECHANICAL Nominal value Unit Test method Tensile…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features High scratch resistance,Ammonium-tolerant Technical Data PHYSICAL Nominal value Unit Test method Density 1.17 g/cm³ ISO 1183 Water absorption rate 23℃，24hr 0.1 % ISO 62 Melt Volume Rate 300℃，1.2…
About Product Description Supplier CHI MEI Generic SAN Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About High performance thermoplastic material, PolyArylEtherKetone (PAEK), reinforced with wear additives, semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black. WG101 does not contain polytetrafluoroethylene (PTFE) or other halogenated additives. Tribological applications with thin cross…
About Hepla® H7020GF H is a Polyamide 12 (PA12) material filled with 20% glass fiber and Heat Stabilizer.Characteristics include:Heat Stabilized.It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Product Description…
About NORYL™ HNA055 resin >PPE+PS-HI< Autoclavable engineering thermoplastic. Biocompatible per ISO10993 (color dependent).&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features Biocompatible,High pressure heat resistance Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…