About Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Negative Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.16 g/cm³ ISO 1183 Melt Volume Rate 250℃，5 kg 6 cm³/10min ISO 1133 Molding shrinkage Vertical…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 2781 Yellow Index 0 ASTM E313 MECHANICAL Nominal value Unit Test method Shore hardness 72 Shore A ISO 7619-1 Abrasion Loss…
About Description High Heat Application Electric & Electronic Housing Automotives Interior & Exterior Housing (Garnish etc)&& Product Description Supplier LG Chemical Generic ABS Material Status Commercial: Active Features High Heat Resistance,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.&& Product Description Supplier SABIC Generic Polyetherimide Material Status Commercial: Active Features ECO,V-0,5VA Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About Product Description Supplier Polyplastics Generic PBT/PC Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.48 g/cm³ ISO 1183 Water Absorption 23℃，24 h 0.1 % ISO 62 MECHANICAL Nominal value Unit Test method Tensile Strength…
About Product Description Supplier Mitsubishi Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，21.2N 10 g/10min ISO 1133 Density 1.33 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method tensile strength 50mm/min 64…
About LNP LUBRICOMP* OCL36 is a compound based on PPS – Linear resin containing 30% Carbon Fiber, 15% PTFE. Added features of this material include: Electrically Conductive, Wear Resistant.&& Product Description Supplier SABIC Generic PPS Material Status Commercial: Active Features…
About Product Description Supplier EMS-GRIVORY Generic PA66 Material Status Commercial: Active Features Medium viscosity,High impact strength,Excellent Processability,Heat Stabilized,Medium Viscosity,high-rigidity Technical Data MECHANICAL Nominal value Unit Test method Tensile Modulus Dry 17.5 MPa ISO 527 Wet Cond 12 MPa ISO 527…
About DuPont™ Elvaloy® HP441 is a ethylene terpolymer, which is most commonly used as a modifier for a variety of other polymers. E/nBA/CO = ethylene/n-butyl acrylate/carbon monoxide Non-migratory plasticizer, and/or flex modifier for a variety of other polymers.&& Product Description…
About Product Description Supplier DOW Generic HDPE Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.947 g/cm³ ASTM D792 Melt Flow Rate 190℃，2.16kg 0.75 g/10min ASTM…