About NORYL GTX914 is an unfilled GTX grade with an ideal combination of impact performance, dimensional stability at elevated temperatures, chemical resistance and processability.&& Product Description Supplier SABIC Generic PPO(PPE)+PS+PA Material Status Commercial: Active Features Excellent Processability,High impact resistance,Good Dimensional…
About Hostalen PP H1850 is a very low flow homopolymer with good stiffness toughness balance. The grade features yellowing resistance in contact with cooling water. Typical customer use is automotive expansion tanks. Hostalen PP H1850 is not intended for medical…
About TECHNYL® A 60G1 V25 Black 2N is a polyamide 66 based on a non-halogenated flame retardant system, reinforced with 25% of glass fiber, heat stabilized, for injection moulding. This grade offers excellent flame retardancy properties (UL 94, 5VA, GWIT)…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Volatile Matter ≤0.4 % KM 04 Melt Flow Rate 230 ℃，2.16 kg 2.0-4.5 g/10min ASTM D1238 11.5-13.5 % KM 03 Total Extractables ≤1.6 % KM…
About Product Description Supplier DOW Material Status Commercial: Active Process Methods Extrusion Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate (Dry)，（Flow） 0.30 % ISO 294-4 Density (Dry) 1.50 g/cm³ ISO 1183 THERMAL Nominal value Unit Test method Melting temperature…
About Low hydrolysed grades&& Product Description Supplier Kuraray Material Status Commercial: Active Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Solution viscosity 29 to 35 mPa·s DIN 53015 Ash Content 0.40 % Volatiles 5.0 % Supplementary Information Nominal…
About TPX™ RT31 TPX™ is a 4-methylpentene-1-based olefin copolymer. TPX™ has a unique molecular structure. Although TPX™ is a crystalline olefin polymer, it shows transparency. Because of its excellent heat-resistance, release property and chemical resistance, TPX™ is used for…
About Tritan™ EX501 is an amorphous copolyester specifically developed for the Infant Care market. Its most outstanding features are consistent glass-like clarity even after multiple dishwasher cycles. Additionally, Tritan™ EX501 exhibits low taste and odor retention versus cPP, excellent drop…
About Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins…