About Product Description Generic PC+ABS Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method 23℃ 1.29 ASTM D792 Melt Flow Rate 260℃，2.16Kg 18 g/10min ASTM D1238 Mold Shrinkage 3.2 mm 0.1-0.3 % ASTM D955 MECHANICAL Nominal value…
About CYCOLOY™ CY6310 resin Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering hydrolytic stability and excellent flow / impact balance for a wide variety of thin wall or large size applications including business equipment, enclosures,…
About Pro-fax 6323 general purpose polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 6323. For regulatory compliance information see…
About Hisun PLA—REVODE190 is a thermoplastic resin derived from annually renewable resources&& Product Description Supplier Hisun Biomaterials Material Status Commercial: Active Features Renewable resources Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.20-1.30 g/cm³ GB Melt…
About MVR (300 °C kg) 15 cm³/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; injection molding – melt temperature 280 – 320 °C; transparent parts for medical devices&&…
About DURAFIDE® 1140A64 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.&& Product Description Supplier Polyplastics Generic PPS…
About Product Description Supplier Mitsubishi Generic PMMA Material Status Commercial: Active Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method Bending modulus 3300 MPa ISO 178 Rockwell hardness 100 M 级 ISO 2039 Tensile modulus 1A/1 3300 MPa…
About Styrolution PS 495F is a high flow, high impact polystyrene with a good heat resistance and a high stiffness. FEATURES High flow HIPS Good heat resistance with high stiffness Suitable for gas-assisted injection molding process APPLICATIONS Consumer electronics: LCD…
About Novodur® Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance. FEATURES Electroplating grade High heat resistance APPLICATIONS Automotive exterior Radiator grills Rollover bar covers&& Product Description Supplier INEOS Generic ABS Material Status Commercial:…
About Product Description Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 220℃，10kg 19.38 g/10min ASTM D1238 MECHANICAL Nominal value Unit Test method tensile strength 3 mm，5 mm/min 45.48 MPa ASTM D638 elongation 3…