About Product Description Supplier Chemours Material Status Commercial: Active Features Good Electrical Properties,Good flexibility,High Heat Resistance,Solvent resistance,No viscosity,Heat Stabilized,Weather resistance is good,Good liquidity Availabilitys Latin America,North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 372℃，5.0kg…
About Product Description Supplier Chemours Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About For inventory control purposes product name may be followed by an X. Products labeled FEP 100 and FEP 100 X are equivalent and all information in this document is applicable to both. Typical Application Wire and cable insulation, small…
About DuPont™ Tefzel 207 fluoropolymer is a special-purpose resin available in translucent, 2.5 mm (0.1 in) pellets. Compared with other grades of Tefzel ®, it has a higher flow rate but still maintains a service temperature of 150°C (302°F). Tefzel…
About Butyl rubber is essentially a product of copolymerization of isobutylene and isoprene. Medium Mooney viscosity. Product characteristics: Appearance – bale of milk-white color; weight of a bale – (30 ± 1) kg; packing – a plastic container; shelf life…
About Product Description Supplier SIBUR Material Status Commercial: Negative Features Block Copolymer,Inoxidizability,Linear polymer structure Availabilitys Africa & Middle East ,Asia Pacific,Europe,Latin America,North America Technical Data PHYSICAL Nominal value Unit Test method Combined with styrene 28.0 – 34.0 % Internal Method…
About Linear styrene-butadiene thermoplastic elastomer SBS L 30-01A is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. SBS L 30-01A is dusted with calcium stearate or amorphous silica Product description:…
About Radel® R-5100 is an opaque, general purpose polyphenylsulfone (PPSU) for injection molding, that offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offers a high deflection temperature and outstanding resistance to environmental…
About YUPLENE B391G is a propylene impact copolymer designed for injection molding applications. YUPLENE B391G has high stiffness, excellent dimensional stability, good impact strength and very high flowability. This is not a chemical cracked grade so it is free from…
About Product Description Material Status Commercial: Negative Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.918 – 0.922 g/cm³ ASTM D792-A Melt Flow Rate 190℃，2.16kg 2.5 – 3.0 g/10min ASTM D1238 Maleic anhydride content 0.8 – 1.0…